ALERT: Due to the inclement weather across much of the country, Medtronic deliveries are currently experiencing delays and there will be longer than normal hold times on the phone. Visit www.Diabetes.shop if you need to place an order, get a sensor or belt clip replacement, or check the status of your supply order. X

MiniMed 630G System Support

Max Fill Reached


3X.X U. Did you see drops at the end of tubing?

What has happened: You have exceeded the number of units expected to fill the tubing. By now, insulin should be at the end of the tubing.

Next steps:

  • If you see drops at the end of the tubing, select Yes
  • If you do not see drops, select No
  • Follow instructions displayed on the pump

4X.X U. Remove reservoir and select Rewind to restart New Reservoir procedure.

What has happened: You have exceeded the number of units expected to fill the tubing. By now, insulin should be at the end of the tubing.

Next steps:

  • Remove the reservoir
  • Check if you still have insulin in the reservoir. If you do, you can continue using the same reservoir
  • Select Rewind to restart the new reservoir procedure