Adding a new basal pattern

Device: MiniMed 780G insulin pump

  1. From the Home screen, press Select.

  2. Select Settings.

    Select Settings screen

  3. Select Delivery Settings.

    Select Delivery Settings screen

  4. Select Basal Pattern Setup.

    Select Basal Pattern Setup screen

  5. To add a new basal pattern, select Add New.

    Select Add New screen

  6. Select a basal pattern name.

    Select a basal pattern name screen

  7. Press Select on the time segment.

    Select a time segment screen

  8. To set one continuous 24-hour basal rate, leave the end time at 12:00A by pressing Select. To set multiple basal rates, set the end time for the first rate using up and down buttons and press Select again.

    Set Basal Rate screen

  9. Use the up and down buttons to set your rate in units per hour. Press Select.

    Set Basal Rate screen

  10. Continue to set rates for the different time periods as needed. The End time for your last rate must be set to 12:00A. Press Select after each entry.

    Set Basal Rate screen

  11. Select Review.

    Set Basal Rate Review screen

  12. Review basal rates. The End time of the final segment must be 12:00A to complete the pattern.

  13. Select Save.

    Set Basal Rate Save screen

  14. The Changes saved screen confirms that your changes have been saved. If you do not see this screen, your changes were NOT saved to the pump.

    Changes Saved screen

System support User guides and manuals