AT
AU
BE
BG
CA
CH
CN
CZ
DE
DK
ES
EU
FI
FR
GR
HU
IE
IN
IT
JP
NL
NO
PL
PT
RU
SE
UK
ZA
Alert: Product and Safety Notice
Email a copy of 'FDA Approves MiniMed 670G System – World’s First Hybrid Closed Loop System' to a friend
Loading ...E-Mail 'FDA Approves MiniMed 670G System – World’s First Hybrid Closed Loop System' To A Friend
Loading ...Latest Comments
Loading ...
Will this decrease finger pricks, other than for collaboration?
Lindsay, I’m not sure how often you currently check your BG, but you will need to periodically calibrate the sensor.
“periodically calibrate the sensor” so you take daily finder pricks. The IMPORTANT SAFETY INFORMATION section above talks about “All therapy adjustments should be based on measurements obtained using a home blood glucose monitor and not on values provided by the Guardian Sensor (3)”
So how is this a closed loop system when you cannot rely on the Sensor Data? Or is it just marketing?
Nadine, the MiniMed 670G system is a hybrid closed loop system, as you still need to calibrate the sensor and bolus for meals. While it is not a fully closed loop system, it is a step toward the that vision while we continue to work on additional steps toward a fully automated system.
But if the incorporated CGM is used to drive the insulin pump and you cannot be quite certain of the BG gauge, how safe is then the entire system? Will this MiniMed be available for children, too? It is notorious that children and teenagers can have significant BG variations which, if not properly tracked by the CGM, can lead to wrong dosage of the insulin, over an unstable loop cycle of the system. If this kind of event happens during sleep, with little chances to notice and recalibrate using BG strips, a drama may happen! How is Medtronic guarding against this kind of event? Thank you!
Alex, the Guardian Sensor 3 is our newest and most advanced glucose sensor with enhanced accuracy and performance, and a longer 7-day life. It’s the only sensor trusted to power a hybrid closed loop system. The system is approved for people with type 1 diabetes, ages 14 and older.
With my daughter’s current CGM, we can see her BG even when she isn’t with us, as long as she has an iPhone with her. Will the 670g and Guardian CGM have the remote monitoring option?
Michelle, the MiniMed 670G system is not compatible with MiniMed Connect, as they reside on different radio frequencies. We have heard feedback similar to yours, and are working on remote monitoring for future products.
Is the 670g waterproof?
Yes, the MiniMed 670G system is waterproof.
Thank you so much!
Yes! Waterproof! Finally, Im soooo happy!!
2 questions.
1) Lindsey was asking about finger pricks. Other than for calobrarions. Ezample
I finger prick 3-4 tomes a day.
How many times a day would i fimger primt while using this lasted devise.
2) I have a senaitivety to the adhesive used to adhere the device to my skin. That is why i have not used a pump in 8-10 years. Has medronic changed the adheaive? Also have they improved the plastic so it does not bend in the tissue causing a unknown blockage.
Hi Liz, calibration should be done at least twice a day. Do you remember which infusion set you used 8-10 years ago?
I used the tender or low profile infusion set. I also have a sensitivity to the adhesive and had to switch manufactures of pumps. I switched 5 years ago.
You previously mentioned an upgrade annoucement in November for pumps within warranties. Do you have this information and costs relelated to in Canada?
Susan, the MiniMed 670G system is currently only approved for use in the US. We expect regulatory approval outside of the US in Summer 2017, but I cannot yet speak to specific countries.
Do you have any information about when the 670G will be available in Sweden?
Hi Rebecka. We expect regulatory approval for the MiniMed 670G system outside of the U.S. sometime in summer 2017, but we cannot yet speak to which countries. We’ll keep the community updated when we learn more.
How would someone with a non Medtronic insulin pump be able to purchase one? I have only had my pump less than a year but this system would be so helpful. Would it basically not be covered by insurance since it’s been less than 3 or 4 years??
Hi Christine. We have programs that offer people with diabetes the opportunity to exchange their in-warranty competitor pumps for a MiniMed system. Please send me your contact information at betweenthelines@medtronic.com, and I will have someone from my team contact you to discuss your options.
Will Medicare cover the pump in California?
I just got a letter that said that the insurance would not cover it because Medicare would not cover it?
Any advice?
Hi Jorge. We are be actively engaging in conversations with CMS about our technologies to better understand opportunities for CGM reimbursement for the Medicare population. As soon as we know further details, we will share them with our customers.
Sara,
Do you happen to know if there are any future ideas to combine the infusion set and sensor? I never would wear my sensor due to the fact of having to replace two different sites so much plus I always managed to keep my sugar levels good due to working out/cardio. It just can be cumbersome sometimes having to deal with two different sites especially if you stay busy all the time.
Hi Max. We’ve heard feedback like yours, but are not able to discuss any future products, due to FDA rules. We do have a smart, dedicated team working hard on what’s next.
What about daily swimmers? Is this system compatible with that activity?
Hi Lonny. Yes, the MiniMed 670G system is waterproof so you can enjoy underwater activities while wearing it.
I’m not sure why more do not suggest this, maybe it is not as accurate, i don’t know. But i have not stuck my finger in several years. I use my forearm, it never becomes sore, and never hurts like a finger stick. I use the different head on my lancet gun that allows me to press some skin to the center of the gun for easy every time sample.
Hi Jeremy,
Different head for your lancet gun? Please explain! 🙂
When you get a new lancing device it often comes with a clear plastic cover for the lance. The instructions with the device explain how to change out the regular cover that the lance pops through to this clear one and also gives the steps to obtain blood sample from arm instead of finger.
The microlet2 by Bayer.
I use this one and it allows me to Check my BG levels on my forearms.
I tried that too and it is a different reading from either spot
My question is: Is the footprint of the 670G model the same overall size as the 630G model? My question is, has the size been reduced to a smaller form factor with the newer 670G model when compared to the slightly older 630G model? Or are they identical size width x height x thickness specs for each would be nice.
Also, the 670G model, is the closed loop system optional? Meaning would it function as a 630G model is the BGM sensors are not used?
The model pump I have is 4 years old, I have the paradigm model. Not sure if I want to get the 630G now or just wait for the 670G model to avoid the $300 upgrade fee.
Yes, Keith, the MiniMed 670G pump is the same size as the MiniMed 670G pump.
You can turn the Auto Mode (the hybrid closed loop) on or off. If you turn Auto Mode off, the system would not function as the MiniMed 630G system because the MiniMed 670G provides you with two other SmartGuard HCL technology options – Suspend before low (which is new and not in the MiniMed 630G system and MiniMed 530G system) and Suspend on low (which is also in MiniMed 630G system and MiniMed 530G system). The MiniMed 670G system also uses a different sensor, Guardian Sensor 3, which is our most advanced and accurate glucose sensor.
If you’re interested in the MiniMed 670G system, gaining experience with the Minimed 630G system will ensure a quick and smooth transition to the MiniMed 670G system, as both systems use the same hardware platform. For this reason, customers on the MiniMed 630G system will receive priority access to MiniMed 670G system through our Priority Access pathway program when it becomes commercially available, and you would be upgrading at a lower cost. I encourage you to learn more about your specific options here: https://www.medtronicdiabetes.com/products/priority-access
I have a 630G and it does suspend when I have lows.= But I can not figure out how to link it with my families I phones will the 670 link to other devices for others to k now what is going on with sugar levels?
Hi Catherine. The MiniMed 630G system and the MiniMed 670G system are not compatible with MiniMed Connect, as they reside on different radio frequencies.
Hi I am so happy to see the 670g. I am not far away from having a fully integrated sustem I remember my first pump in 1981 the Mini-Med which you had to change the battery every day and the infusion sets gave me horrible infections My doctors on Monday are going to fit me for the 670! Oh God is good! I see the day when our curse of Type I Diabetes is no more
ive also heard the new 670G system automatically boluses insulin when glucose levels are an out of range high.thats what a woman at Medtronic told me on the phone….
Hi Dylan. When used in Auto Mode, the MiniMed 670G system automatically adjusts your basal insulin using a target of 120 mg/dL. You will still need to bolus to cover carb intake.
I can never keep my sensor in when I do cardio as the jumping up and down with the weight of the sensor causes the adhesive to loosen.
When I take the sensor out, will this cause a problem with how the new features work? I’d assume it will simply stop if it can’t tell what my Blood Glucose numbers are.
Joe, I’m sorry to hear you’re having trouble keeping your sensor in while doing cardio. I can imagine this can be frustrating. Have you tried these sensor taping tips? https://www.medtronicdiabetes.com/res/img/pdfs/940M11776-013-Additional-Enlite-Tape-Tips.pdf
More information on the MiniMed 670G system will be shared in the spring when it’s commercially available.
About 4 months ago I started using an overlay bandage, IV3000, (6cm X 7 cm) over my sensor. It’s a very thin plastic, good in the shower and when I work up a good sweat. They’re made by Smith & Nephew Medical.
i use the IV3000 patch also. Works like a charm. Very secure and I swim 3 days a week. Last box cost me $64 for 1oo. Not to bad for the added security.
Have you tried Grifgrips? I know they look like they’re for kids, but they work really well.
I have a mini med paradigm how that medical California covered when will this be able to be covered by insurance
Hi Aileen. We’ll be partnering with payers to drive broad access for this new technology, and will share more information when the MiniMed 670G system is available this spring.
Any indication that Medicare and/or Tricare will cover by the release date?
Not yet, James. We will keep the community updated as soon as we learn more.
Does this system have tubing that runs from the Insulin Pump to an insertion site?
Yes, the system has tubing that runs from the insulin pump to the insertion site.
Dr. Hakami, I see from the announcement that before you release the 670G you will be doing additional testing I assume in the field. I’m a 67 year old, male retired and I have had type 1 diabetic for 46 years. I’m extremely healthy and live a very active lifestyle, biking, golfing, walking, lifting weighs, and skiing. I do these types of activities every day.
My question is if you are going to do additional field trails would you be interested in my help. I would be interesting to see how the device works with an older, very active adult.
If this is of interest to your company I would like to discuss with my doctor and get his approval and see what he thinks.
Tim
Hi Tim. The study you may have heard about is our sponsored clinical study to evaluate the safety and efficacy of the MiniMed 670G system in children with type 1 diabetes ages seven to 13. The system is currently approved for people with type 1 diabetes ages 14 and older.
Prior to the spring release, we will be getting our manufacturing lines ready, working with payers to secure reimbursement, and training our employees, physicians, and diabetes educators on the new system so they can provide customers with the best possible onboarding experience.
Any plans to include younger children in trial studies and if so how do I sign up my daughter ? Also my wife is T1D also are there any studies to help her ?
Brian, if you head over to clinicaltrials.gov and search for “Medtronic Diabetes” in the search bar, you can see what trials are currently available.
Hi Sara, we have a 7 year old male who was diagnosed at age 4 with T1D and live in California. We woyld be interested to participate in the trial for 7-13 year olds. Please let me know who to contact if possible. Congrats on the milestone!
Hi Steve – If you want to head over to http://www.clinicaltrials.gov, and type in “Medtronic Diabetes” into the search bar, you can see our clinical trials.
This all sounds great, but unfortunately, Medtronic still insists on using tubing between the actual pump and the infusion set/cannula. At what point are you going to develop your technology so that is not the case? After using a MiniMed pump for eight years I have now gone to a competitor system for the past ten years and I would never go back to this antiquated technology. The main goal of an “artificial pancreas” should be to eliminate high BG scores which is what is causing long term damage to the body and organs. Low scores can be a problem but are not as disastrous as the highs. Keep trying Medtronic, maybe eventually you will come up with a product worth using.
I’m sorry you feel this way, Anna. There’s still more to do as we continue our work toward more advanced solutions, like a fully closed loop system, but the MiniMed 670G system is a big step toward that vision. The system features our most advanced algorithm to date, SmartGuard HCL, which enables the delivery of a variable rate of insulin 24 hours a day based on your personalized needs, maximizing the time glucose levels are within the target range. It’s designed to learn your insulin needs and to take action to minimize both high and low glucose levels.
The data from our pivotal trial, published in JAMA, showed people with type 1 diabetes on the system experienced less glycemic variability, more time in the target range, less exposure to hypoglycemia and hyperglycemia, and reduced A1C compared to baseline data using sensor augmented pumps. I encourage you to check out the results to learn more: http://jama.jamanetwork.com/article.aspx?articleid=2552454
Sara, I just wanted to provide you with feedback from a different perspective. I understand Anna’s comment but I actually prefer the tubing between the pump and my body. The other type completely freaks me out and is too painful for me to wear. Unfortunately, even the slightly larger CGM sensors cause me too much pain to wear. So I am thrilled with Medtronic and am so happy for the company in getting the FDA approval on the new artificial pancreas! It is exciting news for Type I diabetics.
sounds great…was on minimed years ago and switched to a competitor
would be interested in looking at sys again
am curious as to coast
have had type one 48 yrs this nov
James – We will share more information on the MiniMed 670G system in the spring once it’s commercially available. Please check back with us!
Hi. I’ve had t1dm for 50 years this June. What age were you diagnosed? I was 4
I’m considering upgrading pump and can’t decide which one. I’ve only used minimed and have never had a CGM. its a lot to figure out.
Is this device MR Conditional or MR Unsafe for patients?
Great question, Frank. More details will be available in the spring when the system is commercially available.
yes mam! “How would I benefit”. I have a Paradigm 723 but it just went out of warranty.Hopefully it will hold out till spring. Thanks
Hi Cliff. If you’re interested, you could upgrade to the MiniMed 630G system now, and be the first in line to upgrade to the MiniMed 670G system for a low cost. Please let me know if you’d like one of our team members to get in touch with you to discuss your options.
Ok, does it still require two infusion sites? I will not wear more than one infusion site and when i first tried the cgm attachment for my mini med paradigm years ago. It was the most uncomfortable attachment ever. I refuse not only because of discomfort but because it takes up so much room having two infusion sites. I do not want to be a walking cyborg.
Hi Joe, yes the new system requires two sites – one for your infusion set and one for your glucose sensor.
Do you remember which glucose sensor you had previously tried?
Is there any movement toward developing a one site system that includes the infusion set and cgm together? My daughter refuses to “attach 2 things to my body” as she puts it. She’s 19 years old and doesn’t want more marks on her body or to be more uncomfortable than she already is.
Hi Heather. I understand where your daughter is coming from not wanting to attach two things to her body. I’m not allowed to talk future products due to FDA rules, but please know we hear you and have an incredibly hard team working on what’s next.
Hi Sara, I have the 723 Paradigm & just asked for the 630G that being said I had tried the 2nd site piece and it was to bulky & was very uncomfortable. So to even use the 630G I need 2 infusion sites? and is the glucose sensor better on this model than the Paradigm =?
Hi Joe. Yes, the MiniMed 630G system has two insertion sites – one for your infusion set and one for your CGM. Do you know which CGM sensor you previously wore?
Joe, I am not affiliated with Medtronic, but am a customer like yourself. I think you’re asking whether in addition to the pump infusion set the sensor uses a separate site. It does BUT as someone who has been using the Medtronic GCM sensors since 2008, the difference from those earlier painful models is night and day! And I am talking about the currently available Enlite sensors — there is no pain at insertion and once on, I forget I have mine on unless it gets caught on my clothes as I change. I expect the new sensor to be at the same level of comfort.
I also wear the enlite sensors and have no problems with them. In fact, don’t know what I would do without them. They are wonderful especially at night when my blood glucose goes low and my pump automatically cuts off and I still can sleep. That’s a big blessing!
Hi Joe. My daughter is 5 years old . She had 10-15 sugar checks and 6 shots of insulin a day for the first year after being diagnosed. She has been on pump therapy since she turned 2 years old. She has a site for CGM and a site for her pump at all times and it didn’t take her long to get used to it. Your health is priority. I really hope you’ll try again. If she can do it, you can too! Best wishes to you and your family.
I am scheduled for a new replacement pump. Can you tell me what it would cost me to switch to this pump? What about a continuous glucose monitor’s cost.
Thanks
Bob Skellly
Hi Bob. You can be one of the first to receive the new system by taking part in the Priority Access program if you purchase the MiniMed 630G system today – http://www.medtronicdiabetes.com/products/priority-access.
The MiniMed 670G system will be commercially available Spring 2017.
Will this still use the same tubing set/reservoir as the 630?
Yes
I got the 530g system only 4 months ago. How do I get in line for the new 670g without being on the 630g? Or is it ONLY available for 630g users (and if that’s the case, that’s really lame)?
Hi Katie. No, you don’t have to be using the MiniMed 630G system to get in line for the MiniMed 670G system. We will continue to offer a Priority Access program for Medtronic customers who are in-warranty access to the MiniMed 670G system. We will be announcing our upgrade options for in-warranty customers this November. Stay tuned for that informations.
EXCELLENT! 530G w/ CGM here for just over a year. Very interested in the 670G. Thanks.
I was pretty excited about this until I read that users still have to manually enter their carbohydrate intake. I don’t each much processed food with a nutrition label. Often, I have no idea exactly how many carbohydrates are in what I’m eating. If this algorithm is capable of automatically adjusting insulin dosage based on fluctuations in blood sugar, why does it still require this input which is bound to be inaccurate in a lot of cases?
That’s a great question, Brandon. People with diabetes using insulin usually need boluses of insulin to cover for meals, and basal insulin throughout the day to function. The automated basal insulin automatically adjusts customized insulin doses to meet your insulin needs. Since this is basal insulin delivery, the maximum amount of insulin that can be delivered is limited based on your total daily insulin dose. In order to receive bolus insulin delivery, you would have to enter meal announcements on the system or enter a BG value in order to receive a recommended bolus.
Your response does not appear to fully address the question asked: It implies that large hyperglycemic excursions (as can occur as a result of, for example, infection or hepatic gluconeogenesis, which in the latter case can be a delayed post-hypoglycemic “rebound” effect due to adrenaline spikes) would not be covered by the basal-only algorithm.
As an addendum from a different perspective, it is my opinion that the need for ongoing manual intervention renders the “Artificial Pancreas” moniker somewhat inappropriate.
We agree, SM Dambrot. The MiniMed 670G system is a hyrbid closed loop system. While it is not an artificial pancreas, it is a step toward a fully automated closed loop system.
SM Dambrot – When the MiniMed 670G system is used in Auto Mode, the pump automatically adjusts the delivery of your basal insulin based on readings from the Guardian Sensor 3.
I don’t understand how you can regulate your bs if you “have no idea exactly how many carbohydrates are in what I’m eating”. Carbs, colds and cortisol are just about the only things you bolus for? I am on the Ketogenic diet and I don’t bolus when I eat, only because I don’t eat enough carbs to warrant a bolus. How are you in control?
Hi there, I am genuinely excited by this product but live in the UK and wondered if you knew when it would launch here please? I am looking to have my first insulin pump within the next few months and was looking to go onto the Medtronic pump but am now sorely tempted to wait for the 670g. Alternatively as per the US I wonder if there will be an option to upgrade to the 670g for a small fee?
Matthew – We estimate regulatory approval outside of the US is expected in the summer of 2017.
Will the Medtronic infusion sets be redesigned or will existing infusion sets like the Quick-Set still work. What about the reservoirs? Also, my pump and CGM will be nearly 3 years old in the spring on 2017. My insurance co. only replaces my pump every 5 years. Will there be some sort of by back program for people who’s Medtronic pump was purchased before Aug. 10, 2016? I’m on my 4th Medtronic pump. There should be something for customer loyalty:)
Thank you for this exciting news.
Jennifer – the same infusion sets can be used, and only the 3 ml reservoirs are approved for use with the MiniMed 670G system. Yes, there will be upgrade opportunities available for you closer to the spring.
Similar question to Katie S above. What is the timetable and availability to upgrade from 530G with Enlite (530G user for 1-yr). Is there a sign-up portal or offering to become a 670G user?
Hi Mark! As I mentioned to Katie, we will be announcing our upgrade options for in-warranty customers in November, so stay tuned for this information in the coming weeks. In the meantime, if you haven’t already, I recommend checking out our Pathway Program – http://www.medtronicdiabetes.com/products/priority-access
My child will be age eleven when this is released. In an earlier post you stated this was only approved for ages 14 and above. Is he completely ineligible?
That’s correct, JC. The MiniMed 670G system is not approved for people with type 1 diabetes under the age of 14. We encourage you to discuss your options with your child’s healthcare team.
Is the 670G waterproof?
Gordon – Yes, the MiniMed 670G insulin pump is waterproof in up to 12 feet of water for 24 hours at a time, and the Guardian Link transmitter is waterproof in up to 8 feet of water for up to 30 minutes.
Well, that doesnt make any sense. The pumps waterproof longer than the senser? So you have to get out of the water after 30 mins? So when is it waterproof AGAIN for another 30 mins? I am in the lake a lot during the summer. Floating on a raft, swimming, hanging out, etc. Not like you can wear one without the other. Thats odd.
Very encouraging news. I’m probably most pleased with the increased time between CGM site changes. I passed on it last upgrade since it was going to double the usage of the limited real estate on my body. And waterproof, too! Very nice. No more guesswork to go swimming!
It will be interesting to see how the adaptive algorithm improves the basal delivery. My current settings are very good for me, allowing me to fast and not see my BG readings change by more than 30mg/dl for 24 hours, but I would be thrilled to see things even better than that or that good for even longer periods.
This is really a great improvement and really A super thing. I have been T1D for going on 65 years and on pump for about 9 years. I am in very good physical shape from constant maintenance. This would really make my life easier after so many years. Thanks for inf in your answers. Right now have a Paraigm mmt-723 pump.
Mac MacKenzie
Are there trials going on now for children under 14? If so, do you need more children for this study?
Melissa – We are currently sponsoring a clinical study to evaluate the safety and efficacy of this therapy in children ages seven to 13, and conducting a feasibility study in children ages two to six. You can find more information about the clinical trials here: http://www.clinicaltrials.gov.
Hello , my Name is Tye, diagnosed with T1 Diabetes for past 7 months, I live in the UK and am very surprised – confused but overjoyed- the only issue I want to cover is why do I need to input a “Carb” count into the machine – shouldn’t the machine automatically detect my levels are rising and counter act it automatically? I am very active day to day and eat at Restaurants quite frequently so figuring the carb count out isn’t something i’m thrilled about, Also could these systems be worn else where for instance on the arms etc rather than the belly area – im aware arms are far more resilient than the belly area for infusion sites and I would be tempted to wear a sensor on one arm and the pump the other- would there be any issues with this? or is it just ‘not recommended’ for peak test efficiency ?
Thanks – Tye.
Hi Tye. Auto Mode automatically adjusts basal insulin delivery based on sensor glucose values and recent insulin delivery needs, and uses a target of 120 mg/dL. To properly bolus for food you’re about to eat, you need to know how many carbs you’re eating, and the system can’t predict that. More information about how the system can be worn will be available closer to the commercial launch in the spring.
Is there a way to exchange my 630G pump that is due to arrive tomorrow? I want to get this 670 pump and my “new” pump will still be under warranty. Type 1 diagnosed at 16mo old and am now 40 yrs old with perfect vision and no neuropathy.
Shoot, sorry. I see your reply from earlier.
Jeff – That’s exciting you’re MiniMed 630G system is arriving soon! Since you purchased the MiniMed 630G system, you’ll be one of the first in line to get the opportunity to upgrade to the new MiniMed 670G system for a low cost through our Priority Access pathway program. You can read more about the program here: http://www.medtronicdiabetes.com/products/priority-access#details
Really, this new incredible device, and you are going to charge $299 for the advance features. This should be free to the thousands of people that have paid you millions, possibly billions of dollars over the years. How can a company like yours sleep at night knowing this? That is all!
PS: 38 year T1 Diabetic (I knew what pork and beef insulin injections were!)
Ryan, I’m sorry you’re upset with the cost of our devices. While research and development, along with world-class service and support, impact the cost of medical technology, we work very hard to ensure access to our therapies. Insulin pumps are typically covered by insurance and we contract with hundreds of plans nationwide. We also offer financial assistance to those who meet certain criteria.
Beat you there type one for 45 years. Also remember the animal insulin we injected…
I wish we still had it at $8/bottle, rather than $180/bottle…
Beat you both i have had T1d for 65 years and sharpened and boiled needles/glass syringes to sterilize. This sounds light years ahead of how i treated my diabetes in in 1951. I am still very active with no diabetic complications. Have to see what i have to do to get thru medicare?
I not understand the MiniMed 670G as a closed loop system. You still using an infusion set and a sensor link transmitter. I suppose I will have to do further research. I am also retired and on government Medicare insurance. The Minmed 630G was never offered to me but only the Revel recertified pump when my Minimed 722 insulin pump had failed in June 2015. I am hoping Medtronic can work with our government healthcare medicare system so this MiniMed 670 G will also be available to us retired patients as well. I had worked in the medical profession for over 25 years so it was RN’s that taught me everything. I will be 70 years old in November and I am still doing very well keeping my glucose levels in great control. My health is very good and put on the insulin pump in 1979 is only reason I am still going strong. I always count my CARBS on any bolus also. Anyway, I am happy to hear this great news on the Minmed 670G.
Raleigh – I’m happy to hear you’re doing well keeping your glucose levels in control. Keep up the great work!
Please let me know if you would like someone from my team to connect with you to discuss your options to see if you would be eligible for a MiniMed 630G system. Those who purchase the MiniMed 630G system will be one of the first in line to get the opportunity to upgrade to the new MiniMed 670G system for a low cost through our Priority Access pathway program. You can read more about the program here: http://www.medtronicdiabetes.com/products/priority-access.
Has the accuracy of the Medtronic CGMS improved? I wore the Medtronic CGMS for 3 years and consistently had significant fluctuations that could not be accounted for through many, many, many long conversations with customer service. I finally moved to another CGM, and the accuracy and consistency was noticeably improved. After 6 months I cannot recommend using the Medtronic CGMS as it was released with the 751 system. Having a system attempt to “correct” my blood sugar when it was woefully inaccurate is concerning, and I switched away from Medtronic CGMS after too many mornings waking up to a blood sugar of 400 because the CGMS thought it knew better that my blood sugar was 60 despite the calibration at 105 and subsequently suspending during the night… Dangerously inaccurate.
Jared – I’m sorry for this experience and encourage you to find what works best for you. It sounds like you may have been using our Sof-sensor, which is approved with the MiniMed Paradigm 751 insulin pump.
We’ve been continuously improving our sensors over the last several years. Our MiniMed 630G system includes the Enlite sensor, our most advanced glucose sensor technology commercially available that has many improvements in comfort and accuracy. When comparing user guide data, our Enlite sensor is on par with other sensors in the market. The key difference is Enlite’s accuracy is what drives our exclusive SmartGuard technology to takes action to help you stay in your targeted glucose range.
The Guardian Sensor 3 for the MiniMed 670G system is our newest and most advanced glucose sensor with enhanced accuracy and performance, and a longer 7-day life. It’s the only sensor trusted to power a hybrid closed loop system.
Would you be willing to speak to someone about the MiniMed 630G system and determine if it is right for you?
Will Medicare cover this with a Medicaid as SECONDARY? I just received a new pump so I couldn’t get a new one for a year but wondering how and if Medicare will cover this. Also curious about the bolusing for carbs. Will I have to enter my carbs and bolus for them like an insulin pump and if so, how is this different than an insulin pump? Will it come with a test meter? Will it ever be rid of tubing? I’ve always liked working with Medtronic as you guys make stellar products and have excellent cuStomer service. I just sort of feel like if you have to still enter for carbs that it is not a pancreas and still a pump. Does it correct as sugars rise? Also does it give glucose if sugar gets low? The wording is very tricky because to me (from what I’ve read anyways) it seems like it is a glorified insulin pump with a cgm. Please prove me wrong. I’m not trying to hate on Medtronic as I am genuinely curious. I’ll be in the market for a new pump in about a year and want to have all of my information before that. The tubing is a huge downside but if the pump is perfect enough I’ll deal with it. Please answer my questions if you have time. Thanks in advance, Amanda
Hi Amanda. Glad you’re so curious about our new MiniMed 670G system. I’ve answered your questions below. Hope this helps!
We are working with payers to establish coverage for the new system, so stay tuned as we get closer to commercial launch in the spring.
Yes, the system comes with the CONTOUR®NEXT LINK 2.4 meter.
The MiniMed 670G system has tubing.
The MiniMed 670G system is a hybrid closed loop system, which means that when used in Auto Mode, the pump automatically adjusts the delivery of your basal insulin based on readings from our new, most advanced CGM sensor, the Guardian Sensor 3. Auto Mode automatically adjusts basal insulin delivery based on your sensor glucose values and recent insulin delivery needs. Auto Mode uses a target of 120 mg/dL. The system is a hybrid closed loop system, not fully automated closed loop system which we’re working toward, so requires you to enter carbs when you eat and enter blood glucose (BG) readings to calibrate the sensor.
The system also gives you two other SmartGuard HCL technology options:
1. Suspend before low: A new Low Management feature that will temporarily stop insulin delivery if the sensor glucose value is approaching a preset low limit.
2. Suspend on low (Threshold Suspend): Stops insulin delivery once the sensor glucose values reach a preset limit. It also automatically resumes insulin delivery when sensor glucose levels recover.
The system does not use glucose.
Okay, that makes more sense! Thank you so much for taking the time to answer all my questions so thoroughly! This is what makes Medtronic great to me! You guys go above and beyond to help your patients! So, it is not a fully functional pancreas, but close! I like that auto mode stuff. That will help doctors majorly in deciding how much to program your pump for. When is it going to be released? (I don’t remember reading that so I apologize if it is listed somewhere.) also, do you know if Medtronic plans to ever make a tubing free version? That would be so cool if so.
Thanks again for answering my questions! You are awesome!
Amanda
Dear,
May I ask why the minimed 670G device is not recommended below age of 14 years ?
Also, what about type 2 , why only for type 1 ?
Thanks,
Adnan, we will conduct ongoing studies to expand the indication to additional patient populations. In the meantime, the Revel insulin pump is available for peds, and the MiniMed 530G system and MiniMed 630G system are available to people with type 2 diabetes.
I have been living with Type 1 Diabetes for 36 years. I’ll be 37 in November. I didn’t cause Type 1 Diabetes. I didn’t ask for it. No warning was given to my parents that they would need to give injections to their baby girl. No amount of sugar I ate caused my diabetes. In fact, no amount of exercise or healthy eating will ever change what is the truth. And that truth is my pancreas doesn’t work. Not at all. Not even a little bit. I will never be diabetes free unless there is a cure. Although I don’t know what caused your Type 2 Diabetes, and let me repeat that… although I don’t know what CAUSED Your Type 2 Diabetes, I know that it was caused by something outside of yourself. This is the difference as to why this wouldn’t work for you as a Type 2 Diabetic. Lifestyle changes are essential for Type 2 Diabetics. In fact, there’s been so many tests and studies done that have proven that Type 2 Diabetes can be reversed. It can go away. There are actual books out there written by profound nutritionists about reversing Type 2 Diabetes. So to answer your question, this AP that will become available soon to me and the millions of others living with Type 1 Diabetes is the closest thing we Type 1s have to a cure. I’m still waiting for an actual artificial pancreas that would require surgery. Your pancreas may be defective but my pancreas ceased to exist 36 years ago. So maybe while I continue to wait for that cure they’ve been talking about since I was diagnosed, you could get one of those books and reverse your Type 2 Diabetes. Because you have that option. It’s there if you want it. But this thing that is coming out being called an AP allows me to continue hoping for that cure, and that all those living with Type 1 Diabetes will be able to forever end their Diabetes. And we can all go from Type 1 to Type None. Something that Type 2 Diabetics can work on doing for themselves now, if they so choose. Good luck.
Does the new 670G have the MiniMed Connect feature built in so readings will transmit to my phone? And does the new Guardian Sensor 3 have better transmission distance/ range to the receiver than Enlite does?
Michelle – No, the MiniMed 670G system is not compatible with MiniMed Connect, as it uses a different radio frequency (RF) to communicate with MiniMed 530G than the RF frequency that the MiniMed 670G pump use. If you’re interested in connectivity benefits of MiniMed Connect, we do recommend the MiniMed 530G system.
We will have more information available on the Guardian Sensor 3 transmission range closer to commercial release in the spring.
My insurance company only pays for insulin pumps once every 2 years, so I am not able to get the 630G insulin pump system now. Also, my husband is able to view my sugar and insulin amounts on board with his phone using the Minimed Connect and my current 530G. He LOVES this feature; it reassures him that I’m OK when he is not around me) . I was told that this option is not available with the 630G. When will the 670G be available to the public if you don’t go through the 630G access pathway?
Hi Shari. I’m happy to hear you and your husband are enjoying MiniMed Connect! You’re correct, MiniMed Connect is not available with the MiniMed 630G system or the MiniMed 670G system. MiniMed Connect uses a different radio frequency (RF) to communicate with MiniMed 530G (and MiniMed Paradigm Revel) than the RF frequency that the MiniMed 630G pump and MiniMed 670G pump use. For customers interested in the connectivity benefits of MiniMed Connect and its remote monitoring features, we recommend the MiniMed 530G system.
Have you spoken to one of our customer service team members about upgrading to a MiniMed 630G system? We do have a variety of different programs that help many customers upgrade to the MiniMed 630G system. Of course, this does vary by insurance coverage, time since you bought your last pump, etc.
If you are not able to upgrade to the MiniMed 630G system and go through the Access Pathway program, we will have upgrade options available for customers who are in-warranty to access our MiniMed 670G system once available. Stay tuned for this information in the coming weeks.
I just purchased and received the 530G at the beginning of summer, only a couple of weeks before the 630G came out and was wondering if there is anyway to exchange it for the 670G?
Elizabeth – You may be able to upgrade to the MiniMed 630G system, and would then be eligible for the Priority Access program and be among the first to receive the MiniMed 670G. You can learn more here: http://www.medtronicdiabetes.com/products/priority-access. I will have someone from my team connect with you to discuss your upgrade options.
I am disappointed that this new device still has tubing 🙁 I will never go back to that. I feel so much better and so much more comfortable with my tubeless pump. Please work on becoming a tubeless pump.
I’m sorry you feel that way, Patty. Our ultimate vision is to develop a fully closed loop system that would require minimal to no interaction from the person with diabetes. Although there’s still more to do as we continue our work toward even more advanced solutions, the MiniMed 670G system is a big step toward that vision.
Does the 670G take over for basal rates, and adjusts them based on blood sugar levels? Or do you still have to input your basal rates? Am I right that the 530 and 630 use the same sensors but not the 670?
Annette, when the MiniMed 670G system is used in Auto Mode, the pump automatically adjusts the delivery of your basal insulin based on readings from our Guardian Sensor 3. It also gives you two other SmartGuard HCL technology options: Suspend on low (which is also in MiniMed 630G) and Suspend before low (which is new).
Yes, you’re correct that the MiniMed 630G system and MiniMed 530G system both use the Enlite sensor. The MiniMed 670G system uses the Guardian Sensor 3, our newest and most advanced glucose sensor with enhanced accuracy and performance, and a longer 7-day life. It’s the only sensor trusted to power a hybrid closed loop system.
Thanks
Sounds pretty interesting as my doctor has me looking into using a pump. My concern is that I am an endurance athlete so I routinely spend 15+ hours a week training and I do more than 12 races a year including marathons, triathlons, plus open water swims, and cycling events. Is this system going to be able to withstand the rigors of endurance events and the training that goes along with it, including what I assume will be the daily disconnecting for swimming.
Wow, that’s amazing you’re so active! Good for you! The MiniMed 670G insulin pump is waterproof in up to 12 feet of water for 24 hours at a time. The Guardian Link transmitter is waterproof in up to 8 feet of water for up to 30 minutes. We do recommend you still take care of it and don’t go swimming with it, but the pump will maintain waterproofing if this can’t be avoided.
Is the sensor still the same basic physical design as the original Paradigm system? I went to another CGM supplier due to the sensors constantly pulling out, so I put my engineering cap on and looked at the issues:
1. Two pieces of adhesive stresses the attachment point and the shearing forces pull on the adhesive. (In English, you have this flippy thing attached at the fulcrum, and that catches on clothes)
2. The answer to detachment is “more tape.” The competition has one piece of adhesive that the sensor attaches to. Nothing to catch on my undershirt. I’ve had 4 sensors pull out in 5 years, vs. about 50-60% within 3 days with the Paradigm. In fact, as a test, I left the competitor’s sensor in for 2 weeks and it stayed there until I peeled it off. A detached $40 sensor is worthless, and a pain to call up, be put on hold, then told that I’ll get a new one in 4-6 days, and please send the old one back.
I’m in the market for a new pump, and very interested, but unless the sensor is better than the competition, no sale.
Jeff – I’m sorry about your previous experience with sensors. The MiniMed 670G system uses the Guardian Sensor 3, our newest and most advanced glucose sensor with enhanced accuracy and performance, and a longer 7-day life. It’s the only sensor trusted to power a hybrid closed loop system. We will have more information around the wear of the sensor and transmitter closer to the product release.
So its basically a CGM and an insulin pump. The only advancement is that they communicate? This took decades to figure out? Just another stop along the sloooooow work toward a cure. I’ve been diabetic since age 4. 30 years later I do have a slightly better level of control but the real difference is my pockets are now full of device, my body is full of infusion sites, and my insurance company gets a much larger bill. I still do finger pricks, I still have to input carbs. The entire industry revolves around money and this is just the next step to make extra dollars with fancy new devices that don’t do anything miraculously different. No different than Apple.
Hi Trent. I’m sorry that you feel this way. There’s still more to do as we continue our work toward even more advanced solutions like a fully closed loop system, but the MiniMed 670G system is a big step toward that vision. What makes the MiniMed 670G system the first approved hybrid closed loop system worldwide is the ability of SmartGuard HCL technology to automatically adjust the delivery of basal insulin based on your CGM sensor glucose values.
I take it you’re not a scientist, Trent? Progress toward anything takes time, especially when dealing with something as unpredictable as human biology. You don’t have to pull out a needle at every meal anymore, do you? You know at all times what your blood sugar is and you can trust that number more and more with every new sensor. Not only that, you know which direction your blood sugar is headed, which is incredibly useful. Your finger pricks are less often and your blood sugars stay under better control. You don’t have to carry a vial of insulin when you go out to eat. Try to look on the bright side of life a little and appreciate more the companies that work every day to make your life a little easier and longer.
Dr.wonts me to be on th 630g Jiberty medical say’s they don’t even have the 630g get im a 58myr old man should wait for the670g?
Hi Larry. You can be one of the first to receive the MiniMed 670G system by taking part in the Priority Access program if you purchase the MiniMed 630G system today. You can learn more about the program here: https://www.medtronicdiabetes.com/products/priority-access
How much will the 670g weigh?
Erik, the MiniMed 670G system weighs 95.7 grams, or 3.38 ounces.
Two questions: I heard a rumor that the system will not allow a target bg level lower than 120. We try to keep our son under 100 so a low range of 120 seems too high.
Second, does the system automatically increase insulin delivery when it sensing rising levels? I understand the suspend before low, but does it also deliver more if he’s going high?
Thanks. We’re excited for this new technology.
That’s correct, Maryann. The standard target glucose setting in Auto Mode is 120 mg/dL. When auto mode is active, the device can automatically adjust basal insulin by increasing, decreasing, or turning off basal insulin delivery based on sensor glucose levels.
I’ve been using continuous infusion insulin pumps since 1980. As with Maryann’s son, my average blood sugar presently averages significantly lower than the 120 mg/dL target for the 760G system. If I purchase this system and find my blood sugar control is not as good as my present control with a Paradigm pump, will I be able to use the 760G in a non-Auto Mode which allows user determined settings of multiple basals and boluses (as does my present Paradigm pump)?
Richard, you do have the option to use the system in manual mode.
I’ve just used the pathways for upgrade to the 530g in June this year, will I be eligible in the spring of 2017 to use pathways again to upgrade to this new 670 closed loop sysyem?All of this is so new to be because 2 years ago I had to have my pancreas, as well as my islet cells (which could have been transplanted into my liver; their home to produce insulin but Medicare and all their infinite wisdom found it less expensive to trash my islet cells and hope that I live 20-30 years with diabetes and its complications) removed due to a tumor as well as the pancreas becaming so sick from chronic pancreatitis and it just quit working. I love this system, however, I am always looking for something that will make my life easier. I feel as though I babysit this pump, the CGMs and the entire system. I still set my alarm at night to get up and check my blood sugars. I have had too many close calls of hypoglycemia during the night even wearing the pump. I guess, I want that “perfect” and reliable artificial pancreas I heard about prior to going into this life changing disease. Before i could even begin using any pump system, Medicare guidelines made me wait 6 months before they would approve any form of system because I wasn’t insulin dependent 6 month prior to my surgery or wearing a pump. Then for me to wear the monitors I have to pay out of pocket, that is a good amount of change every month for a person on a fixed income. I paid out of pocket to upgrade through the pathway program in addition pay out of pocket for my CGM. Medicare does not recognize this as a necessity but as “experimental”, even though it is approved overseas. Will I be able to upgrade through the pathways program to this new 670 coming out in spring 2017. Or will Medicare have some loophole on this? I’m very much interested for anything that will make my life some what tolerable with T1D
Hi Susan. We will offer a Priority Access program for Medtronic customers who are in-warranty access to the MiniMed 670G system. Keep an eye out in the coming weeks for more information.
Medtronic wants $3,100 to upgrade.
Will the CGM be compatible with the iWatch? I just purchased the 630 G and it is not.
Hi Roy. As of now, the MiniMed 670G system will not be compatible with the iWatch.
I read a comment from Elizabeth above asking basically the same question about trade in or something with my 530g that i upgraded to in June this summer, and i would like to upgrade to 630g so I could be eligible for the new 670g. Could you have someone contact me regarding this please. THANKS, Susan
Hi Susan – Please call 1-800-238-7111 to speak with one of our team members that can help you with your upgrade. You can also learn more about the upgrade here: https://www.medtronicdiabetes.com/products/priority-access#details.
We have recently purchased a new pump from a competitor but are very interested in this new technology. Will the insurance companies be flexible in allowing patients to change companies given that the system is new and was not available at the time the current pump was purchased?
Hi Cynthia. We’ll be partnering with payers to drive broad access for this new technology, and will have more information in the spring when the product is available. At that time, someone from my team can help you out to discuss your options.
Hi, I am very interested on the MiniMed670! I am currently using competitor products, so it will be a big change for me. Would you be offering informative setions or something of that nature that I can attend?
Hi Jimena. Yes, when starting on our product, you will have an experienced training and education team that will help you get the most from your new therapy. Additionally, you will be partnered with your own StartRight representative, which will offer you personal coaching that will help you get started on your new system.
My friend sandeep is suffering from type II diabetes .Do this machine help him too in controlling blood sugar.
Hi Pawan. The MiniMed 670G system is currently approved for people with type 1 diabetes, ages 14 and older. However, our MiniMed 630G system is approved for people with type 2 diabetes. There are many clinical and lifestyle benefits of insulin pump therapy for people with type 2 diabetes who require insulin.
Hi, Can I ask how much more expensive is new sensor, 10%, 50% ? I’ m assuming that its not the same or cheaper,- it might sound strange but I do not like being a burden to my insurance c0.
Hi James. We will have more information on the pricing of the system closer to the spring once commercially available.
I just ordered a 630G pump. Will the transmitter for that pump work with the 670G? Thanks
Hi Mindy. No, the transmitter for the MiniMed 630G system is different than the transmitter for the MiniMed 670G system. The MiniMed 670G system used the Guardian Link 3 transmitter.
I have been waiting for years for this. I am retired and have Medicare and Medicaid. Will this be covered???
Nancy – We’re working with payers for broad access to the technology. We’ll have more information available in the spring.
Do you have any information on the current estimated cash cost of the new Guardian Sensor 3 for the 670G pump compared to the current Enlite Sensor price. I am on Medicare and pay cash for my Enlite sensors with my current 530G Pump. If you have no information, when do you think it will be available.
Thanks.
Hi John. We will have more information on the pricing of the system closer to the commercial launch in the spring.
Will this artificial pancreas and it’s CGM component be water proof?
Hi Holly – yes, the MiniMed 670G system, which is a hybrid closed loop system, is waterproof.
Is this device suitable for patients whose Pancreas have been removed with an operation because of Pancreas Cancer?
Aydin, the system is approved for people with type 1 diabetes ages 14 and older.
Great to have forum like this and the new system sounds great. I have commented a couple of times but am concerned about getting Medicare to supply the new system. I am due for a new pump this year. I am 76 years old a nd in great shape with no complications(hiked about a mile with canoe into rugged area of Adirondacks yesterday) i have been T1D since 1951 (65 years) i am concerned about how much medicare will cover and wondering if there is any info available on medicare.
Thank you
Perley – We are partnering with payers to drive broad access for this new technology, and will have more information closer to the spring when the system is commercially available.
Does the CGM communicate with an iPhone for reporting blood sugars to loved ones? I noticed the 630 lost this functionality for some reason
Griffin, you’re correct. The MiniMed Connect uses a different radio frequency (RF) to communicate with MiniMed 530G (and MiniMed Paradigm Revel) than the RF frequency that the MiniMed 630G pump and MiniMed 670G pump uses. For customers interested in the connectivity benefits of MiniMed Connect and its remote monitoring features, we recommend the MiniMed 530G system.
HI, I’m wondering if the 670G will eventually be approved for patients who are pregnant. I’m hoping to achieve really good control with this new pump during a time in the future when I hope to have a baby, so I’m curious about its safety during a pregnancy.
Amber, we will conduct ongoing studies to expand the indication to additional patient populations.
Will this have a connecting meter? Will parents/caregivers be able to see CGM information on an iPhone or other device?
Hi Laurie. The MiniMed 670G system comes with the CONTOUR NEXT LINK 2.4 meter. The system is not compatible with MiniMed Connect, as it uses a different radio frequency (RF) to communicate with the RF frequency that the MiniMed 670G pump uses. If you’re interested in the connectivity benefits of MiniMed Connect and its remote monitoring features, we recommend the MiniMed 530G system.
Hi, Congrats! It’s a step in the right direction. Actually I’m “working” with a passive CGM!
Lets see how the 670G will improve the values, especially during special situations (e.g. Stress, Sports,..). Loking forward to see the 670G in Germany. Again, it’s a step in the right direction! Thx!
Will the 670G be compatible with the Minimed Connect system? I’ve been using the software with my 530G and it definitely helps in managing my BG as well as keeping my family informed.
Hi Diane. No, the MiniMed 670G system will not be compatible with MiniMed Connect, as it uses a different radio frequency to communicate with MiniMed 530G than the RF frequency that the MiniMed 670G pump uses. If you’re interested in the connectivity benefits of MiniMed Connect and its remote monitoring features, we recommend the MiniMed 530G system.
Is there a timeframe in which there will be remote access to the 670G cgm monitoring? That will play a role in choosing our next pump due to my daughter’s upgrade eligibility.
Hi Trish. This is an important feature we are working to develop, but unfortunately, I’m not able to provide any timelines.
Hi Aileen. I want to buy the product MiniMed 630G system
Medicare has been less than thrilled with covering sensors of any type – do we have any indication as to which way they may go now that the sensors are an integral part of the system?
Hi Roger. We are working with payers for broad access to this new technology, and will have more information closer to the spring when the system is available. If you’d like to discuss options with the products available today, please email me at dhelp@medtronic.com.
What is the size of the 670G insulin pump? I know the 630G pump is larger than the 530G pump and only the larger reservoirs can be used with the 630G. I prefer a smaller pump that uses a smaller reservoir because I don’t require a large amount of insulin. The smaller pump is also less awkward and burdensome. At the very least people should have a choice between a larger one and a smaller one as you have done with your other systems.
Hi Barbara. The MiniMed 670G system is the same size as the MiniMed 630G system. The dimensions are 2.1”W x 3.78”H x 0.96”D.
What is the difference between the 630G and the 670G?
Hi Scott. The SmartGuard technology in the MiniMed 670G system and MiniMed 630G system are different, and they use different sensors.
The MiniMed 630G system and MiniMed 530G system use the Enlite sensor, and the SmartGuard technology available in these systems include one level of automation – Suspend on low. Suspend on low takes action to reduce lows by automatically stopping insulin delivery for up to 2 hours when the sensor glucose value reaches a preset low limit.
The MiniMed 670G system uses our newest Guardian Sensor 3, is a hybrid closed loop system, and features our most advanced SmartGuard technology – SmartGuard HCL. SmartGuard HCL includes three levels of automation – Suspend on low, and two new advanced features, Auto Mode and Suspend before low.
Auto mode automatically adjusts basal insulin delivery based on the user’s sensor glucose values and their recent insulin delivery needs. Auto Mode uses a target of 120 mg/dL and requires users to enter carbs when they eat, accept bolus correction recommendations and enter blood glucose (BG) readings to calibrate the sensor.
Suspend before low stops insulin delivery if the sensor glucose value is approaching a preset low limit and resumes delivery when levels recover. Suspend before low feature takes further action to address lows. Instead of stopping insulin delivery when the preset low limit is reached, Suspend before low stops insulin delivery before the low limit is reached. It also automatically resumes insulin delivery when sensor glucose levels recover.
What kind of wait time will I be looking at for the 670g if I do not upgrade to the 630g? I’m not interested in the 670g and don’t want to spend money on a pump to upgrade again in 6 months. However, I don’t want to have to wait a year to receive the 670g just because I’m not in a priority program.
Hi Robin. I understand your concern. Customers who do decide to upgrade to the MiniMed 630G system will be able to upgrade to the MiniMed 670G system for a low cost. We will also have options for customers who are in-warranty to upgrade to the MiniMed 670G system, but I cannot yet comment on the timing. We should have more information in the coming weeks. If you’re interested in learning more about your options, please email me at dhelp@medtronic.com.
Hi, I’m curious, does the height dimension noted above (3.78”H) include the “neck” where the reservoir and tubing meet up? Or is that only to the flat portion, so 3.78″H plus the “neck”?
Thank you 🙂
Lisa, the pump dimensions do not include the height of the reservoir cap.
Hi Sara I have a question
I have type 1 d and I’m 27yrs old male
I never used insulin pump before I was ready to purchase the minimed 630g but since the 670g is approved should I wait until the spring or it will be harder to get one since the 630g users can be in the front line ??
Do you think there is enough for everybody we still have to wait more to get one ?
Hi Younes. If you’re interested in the MiniMed 670G system, gaining experience with our newest hardware platform via the Minimed 630G system will help you with a quick and smooth transition, as both systems utilize the same hardware platform. Additionally, you will be eligible to upgrade to the MiniMed 670G system at a low cost. Please visit this site for more information: https://www.medtronicdiabetes.com/products/priority-access
Hi Sara. You’ve been put through the ringer, here. I have a question about this new machine. Will I be able to use higher BASIL rates than on the older machines? I’d like to use higher basil and lower bonus rates to take greater advantage of the automatic feature.
Hi Thom. Auto Mode automatically adjusts your basal insulin delivery based on your sensor glucose values and recent insulin delivery needs. Auto Mode uses a target of 120 mg/dL and requires you to enter carbs when you eat and enter blood glucose (BG) readings to calibrate the sensor. Does this answer your question?
I currrntly have a 530g pump and CGM. How or what would I need to do to upgrade to the new one in Srping 2017? Would I need to upgrade now to the new 630g and then to the newest system in 2017?
Great products by the way. I am a full time firefighter/paramedic and this system is a dream come true
Matthew – I’m really happy to hear you’re enjoying our products, and would like to thank you for serving our community being a firefighter and paramedic.
The fastest and easiest way to upgrade to the MiniMed 670G system is through our Priority Access program. Through this program, you would be upgraded to the MiniMed 630G system now, and once the MiniMed 670G system is available in the spring, you would be one of the first to get on the system at a lower cost. Please visit this site to learn more: https://www.medtronicdiabetes.com/products/priority-access
One of the features I really like about the 630G is that I can test my BG and program a bolus right from the meter without taking out the pump. Will remote bolusing from the meter be possible with the 670G?
Thanks!
Yes, the MiniMed 670G system will have the remote bolus feature as well.
Hi Sara, I have been a Minimed pump user for 20 years. I currently have a paradigm 551. I work in a hospital, on a telemetry unit. I frequently get lost signal alarms when using the cgm at work, even when pump and sensor are less than 6 inches from each other. Has the new sensor solved this problem for those of use that work hospitals and telemetry units? If so, I am excited to try the 670g pump.
Hi Sarah – Thank you for being a loyal Medtronic customer for all of these years. I’m sorry to hear you’re having connectivity issues between your CGM and pump. The MiniMed 670G system uses the Guardian Sensor 3. It is an entirely new CGM sensor and is the first and only sensor approved by the FDA to power a hybrid closed loop system. It incorporates diagnostic technology that continuously monitors sensor health.
Please let me know if you would like someone to contact you to try and help with your connectivity issues.
I currently use the Paradigm 551. Can you tell me if the new pumps 630g and 670g transmit blood sugar readings thru Bluetooth to smart phones without any external device?
Hi Chris. The MiniMed 630G system and MiniMed 670G system are not compatible with MiniMed Connect, as both pump platforms use a different radio frequency than the MiniMed 530G system and MiniMed Paradigm Revel.
Will the 670g be able to transmit directly to the iPhone to send blood sugar readings like some of your competitors pumps already do?
Chris, as I mentioned above, MiniMed Connect is not compatible with the MiniMed 670G system. MiniMed Connect uses a different radio frequency (RF) to communicate with MiniMed 530G than the RF frequency that the MiniMed 630G pump and MiniMed 670G pump uses. If you’re interested in the connectivity benefits of MiniMed Connect and its remote monitoring features, I recommend the MiniMed 530G system.
I am Type 1 for almost 40 years. I finally went on the pump (Paradigm) almost 3 months ago and am now so very sorry I waited so long. My readings are so much better now. My question is will my Humana HMO Insurance allow me to purchase the new Minimed 670 G. Do I put in my request now? What can you recommend.
Yvonne, I’m happy to hear you’re doing well on insulin pump therapy! You could upgrade to the MiniMed 630G system now through our Priority Access program, and be first in line to access to the MiniMed 670G system at a lower cost when it’s available in the Spring. If you want to wait, we will have more information on insurance coverage and upgrade options for the MiniMed 670G system closer to when the system is commercially available. Let me know if you’d like a team member to call you to discuss your options.
I feel like my current sensors over the past 4-5 years hasn’t been reliable enough to allow the pump to make the decision for me to add or reduce insulin. What has changed that gives Medtronic so much confidence (and the FDA for that matter) that this will work without risking patients lives?
Hi Joe. The MiniMed 670G system uses the Guardian Sensor 3, our newest and most advanced glucose sensor with enhanced accuracy and performance, and a longer 7-day life. It’s the only sensor trusted to power a hybrid closed loop system, and incorporates diagnostic technology that continuously monitors sensor health.
I think that this product is exciting but I disagree with the role out process. If you have a recent pump you can upgrade for $299 as soon as they become available. That’s nice but what about the long term medtronic pump user? We have been long term customers and loyal to medtonic and their products. Is there a convenient upgrade deal for other medtronic pump users?
Dan, we will have upgrade options for Medtronic customers who are in-warranty access to the MiniMed 670G system. Stay tuned for more details in the coming weeks.
is this just one injection site that monitors glucose and gives you insulin? or is it two different sites one for cgm and the other for insulin delivery?
Hi Noe. There are two sites – one for your infusion set and one for your CGM.
Will the following be compatible with the 670?
1. Quick-set 6mm Cannula / 43″ Tubing (10/box) – MMT-398
2. MiniMed® 3.0 ml Reservoir (10/box) – MMT-332A
Assuming the 670 will NOT fit in the current 7 series clips, will Minimed take back any clips for the 7 series for the new pump and credit the accounts?
Thanks
Yes, the Quick-set and MiniMed 3.0 mL reservoir are compatible with the MiniMed 670G system. You may return your belt clip if it is within the 30 day return/exchange window.
What is the cost of the 670g without any insurance assistance?
Hi Lela, we will have pricing information available in the spring when the system is available.
Many thanks to Medtronic for finally bringing the closed-loop pump to fruition.
Sara, you are a great knowledge resource. Thank you for your work to inform patients.
I highly recommend that recent T1s and parents fo T1s take a deep breath and embrace this new technology. As a T1 , or person with diabetes (I am not interested in the term of the day), I have been waiting nearly 40 years for this type of technology. The creation of the glucose monitor changed my life. The pump made it even better.
MiniMed/Medtronic’s dedication to bringing his closed-loop technology to life is amazing.
It will improve my life as we seek to develop a true artificial pancreas.
Thank you for the kind words, Kim! We’re excited to deliver the first hybrid closed loop system to people with diabetes, and think it will have a very big impact on their lives.
Hello, this sounds like a wonderful system. My only question prior to ordering would be if it is compatible with the minimed connection with the android phone, which isn’t out yet unfortunately, but expected soon (I hope and pray)? (It is on the iPhone, but not interested in iPhone)
Great question, Deb. The MiniMed 670G system (and MiniMed 630G system) are not compatible with MiniMed Connect because they reside on incompatible radio frequencies. We understand the importance of being able to remotely monitor your diabetes health information. If you are interested in the connectivity benefits of MiniMed Connect and its remote monitoring features, we recommend the MiniMed 530G system. We are working on an Android version that will be available soon.
Hi Medtronic,
My name is Darwin Perez from PR.
I have been diabetic since I was 15 years old and currently I have 26 years with the condition.
I was the second patient to use insulin pump in PR 20 years ago and believe me this is a great therapy . I currently use the insulin pump 530G and it helps me to have an A1C of 6.0.
I recommend this theraphy which is one that helps each person to achieve health and life. Medtronic is the best thing that has happened in my life with the help of my doctor.
Good bless all.
Darwin, thank you for sharing your experiences with us. I’m really happy to hear you’re doing well on insulin pump therapy. Keep up the great work!
Hi, can you provide a price to purchase 670g.
Does the device calculate the amount of insulin you need automatically.
What insulin cartridges would need to be used and do you know if these will be given on prescription.
Thank you
Angela Osborne
Hi Angela. We will have pricing available closer to the launch date in the spring. You can also contact dhelp@medtronic.com to discuss your upgrade options. When used in Auto Mode, the MiniMed 670G system automatically adjusts the delivery of your basal insulin based on readings from the Guardian Sensor 3. The system uses a 3 mL volume reservoir and does require a prescription to purchase.
Hello,
I have a question about the need to give yourself boluses for carbs with this new system. I honestly don’t understand why this is necessary. I understand that basal rates and carb correction ratios can be different, but if this system is already monitoring and treating blood sugars in real time, why can’t it do the same for blood sugars rising (or falling) from food intake? As someone who has been a type 1 diabetic for 20 years, I feel like this is the main thing keeping this system from being revolutionary (or is it?). You’ve said ‘auto mode’ does this, but does it really? Please clarify.
Sam, the Auto Mode feature of the MiniMed 670G system requires you to enter the amount of carbs for your meals. Auto Mode will make small adjustments to insulin delivery based on sensor values every five minutes, but the algorithm is not intended to correct for missed meal boluses.
Hi. My name is Aubrey. I was wondering why the 14 years and up age restriction? My son is 8 years old. He has had T1D since the age of 4. His doctor told me of the AP system finally being approved by FDA the same day that everyone announced it. She thinks it is crucial to have my son on a system like this yet we are worried about insurance and what not due to his age. His blood sugar levels are impossible to control at times. If we treat a high, he goes low. If we treat a low, he goes high. When he drops he drops fast and usually never feels the change. His blood sugars are affected by Everything. He’s been in the hospital over having just the common cold. I try to be as vigilant with his care as possible but being a single mother I can only stay up for so long at a time. Some days it seems like a never ending war has been raged on my family. I’ve heard many Doctors say that young children can have the hardest blood sugars to manage yet it’s so difficult to ever get them approved to use awesome devices like this that can be so wonderfully life changing. I’m just not sure I fully understand why young children shouldn’t have access to something like this.
Hi Aubrey. The patient population in the MiniMed 670G system clinical trial were people with type 1 diabetes ages 14 and older, which is why the system is only approved for that population. We are working on a clinical trial with children with type 1 diabetes under the age of 14, but I do not have timing on that process. I recommend you talk to your son’s doctor about the best option for him.
My child transitioned to a 630G one month ago, combined with an Enlite sensor. More daily effort than pens but we’re seeing better control, mainly due to the ability to apply bolus correction. It’s a long road, one day at a time. By the way, does the Enlite sensor use 2.4 GHz as a transmission frequency? Is this safe long term?
Hi Mike. I’m happy to hear your child is doing well on the new system! Like any new technology, starting on insulin pump therapy can take some time to learn and adjust to, but I’m sure your child will get the hang of it in no time at all! If you do have any questions about the product or therapy, remember our 24-hour helpline is always available to help.
The Guardian Link transmitter (not the Enlite sensor itself) does use 2.4 GHz for transmission frequency, and it is safe to use.
I currently use the MiniMed 530g insulin pump. I received it a year ago through my insurance. The warranty is not up until Sept 2019. I didn’t want to update then, but my pump broke and the warranty on that one was up. I even tried to get into the clinical trials for the 670g, but I never got a response from anyone. I have been waiting for this pump since before the 630g was even available in the united states.
My question is, will there be an opportunity for me to upgrade to the 670g before my warranty is up and without having to buy the 630g?
Hi Rachel. Yes, we will have upgrade options for customers who are still in warranty to upgrade to the MiniMed 670G system. We will have more information on this in the coming weeks so stay tuned.
I have not seen any information about in-warranty upgrade options yet. Are we still waiting on information about these programs?
Hi Rachel. We are offering a Priority Access program for our customers who are in-warranty to access the MiniMed 670G system. Please call 1-800-238-7111 to speak with one of our Diabetes Therapy Consultants who can discuss your upgrade options.
Hello Sara, when do you will approve MiniMed 670G in Germany?
Best regards,
Michael
Hi Michael. I cannot speak specifically to Germany, but we expect regulatory approval outside of the U.S. in the summer of 2017.
I would like to get more info on med 670g
Hi Sherri. What kind of information would you like to know about the MiniMed 670G system? You can get more information here as well: http://www.medtronicdiabetes.com/products/priority-access
My son currently uses the Minimed Veo pump, with Enlite sensors. Is Veo equivalent to 530G?
When will the 670G be available in Canada?
David, the Veo and MiniMed 530G are similar but not identical. The Threshold suspend range, max bolus, and other settings are different in the MiniMed 530G system.
While I cannot speak specifically to Canada, we expect regulatory approval of the MiniMed 670G system outside of the US sometime in the summer of 2017.
I have seen references to both the 630G and the 640G. What is the difference between these two pumps?
When will the details about the Priority Access Program and the details on how to enroll in the special survey program for the free upgrade from the 630G to the 670G? be made available?
Hi Jim. You can learn more about the Priority Access program here: http://www.medtronicdiabetes.com/products/priority-access
Let me know if you’re looking for additional information you did not find on the site I provided.
Will the new system have bluetooth capability where it can send alarms and notifications to a smartphone app? One thing I’d love to be able to do is at least clear an alarm without having to dig the pump out my pocket everytime. My phone is always out, it would be nice to be able to have some control from the phone at some point in the future. Thanks!
Hi Steve. The MiniMed 670G is not compatible with MiniMed Connect, as they communicate on different radio frequencies. We have heard feedback like yours and are looking into this.
Hi, I have had T1D for 22 years and been in insulin pump therapy for 4 years with a competitor. When I read the news from Web MD about this new pump I was really excited but after reading the comments above, and the info medtronic has released I have several remarks:
1.- If in auto-mode the minimed adjusts the basal rate according to CGM readings, then what happens with basal rate after a meal. Usualy after a meal (even with bolus insulin) BG rises accordingly to the type of food you ingest, if the pump detects that BG is rising wouldn’t it increase the basal rate, disregarding the bolus insulin you just had, and inducing a low BG?
2.- I really think it’s not a great deal what medtronics has achievied, a while ago (2+years), when searching for CGM’s I found this technology in an insuling pump (I don’t remember the system or provider). But for only controlling the basal rate, without being able to adjust bolus or to communicate with smartphones, it just translates in a publicity stunt to sell another “must have” product to people with T1D.
3.- I am a user of tube free, reservoir free and insertion kit free pump and it is awesome!! I really don’t know how I would deal with a tube or having to carry the heavy big pump on me all the time or the whole package when traveling. Medtronics should really look into portable, comfortable technology, instead on launching systems that aren’t really an improvement.
4.- I’ve noticed that most of the important questions are not being answered, and all refers to the launch in spring, or are avoided by sending us to another web page, is that because the question is being avoided or because really there is no answer at the moment?
Thanks 😉
Hi Erika. Great feedback, thank you for sharing.
When the system is used in Auto Mode, the basal insulin will adjust according to your sensor glucose values and recent insulin delivery needs using a target of 120 mg/dL, so it will take into account your bolus for food.
I’m sorry you feel this way. The MiniMed 670G system is the first hybrid closed loop system in the world, and we are continuing to work toward more advanced solutions like a fully closed loop system.
We have heard feedback like yours about having a tubeless pump, and have passed this along to our product development teams.
Some of the product questions we are unable to answer until we’re closer to the launch date, and some of the questions can be answered from the page we refer to the readers. Let me know if you were looking for a specific answer you did not read in the comments.
Is this device can be available in India ?
Hi Vijay. The MiniMed 670G system is currently only approved for use in the United States. We expect regulatory approval outside of the US sometime in summer 2017, but I cannot speak to the timing on India specifically.
What is the difference between the 630G and the 640G pumps?
Hi David. The system available outside of the U.S. has Suspend before low and Suspend on low, and the MiniMed 630G system only has Suspend on low.
I currently am using a Medtronic’s Paradigm Insulin Pump which I started in Nov., of 2012. Will Medicare cover the cost of the new Medtronic’s 670G and the supplies, and if so, when would I be able to get one?
Hi Evonne. We are currently working with payers to drive broad access for the MiniMed 670G system, and will share more information closer to launch in Spring 2017.
Hi, I just got a new Medtronic pump the 630g and Kim the nurse who train me on this pump and she said I need to go on line and put my name on one of the 670g pumps I can’t see a place to do that but I thank the 630g is cool it’s helping me out a lot but I thank the 670g will help me out even more so can you tell me how to get my name in for one
Hi Ricky. You can learn more about our Priority Access program here: http://www.medtronicdiabetes.com/products/priority-access. Please call 1-800-238-7111 to speak with one of our Diabetes Therapy Consultants who can help get you enroll in the program so you can be first in line to receive the MiniMed 670G system when it’s available in spring 2017.
Am looking forward to buy an 670 product but currently am in mainland china , we can’t even buy 640G here wondering will 670 product arrive china? also how i can contact your colleague in China tho? wondering whether when 640G or 670G will launch mainland China?
Hi Gao. We expect to have regulatory approval outside of the US for the MiniMed 670G system in Summer 2017, but I cannot comment specifically on China.
Here is the contact information for the China team.
Landline: +86 800-820-1981
Mobile Phone: +86 400-820-1981
Calling from outside China: +86 400-820-1981
http://www.medtronicdiabetes.com.cn
Does the 630G and will the 670G work with the miniMed connect app?
Hi Leah. The MiniMed Connect does not work with the MiniMed 630G system or MiniMed 670G system, as they use different radio frequencies. If you’re interested in the connectivity benefits of MiniMed Connect and it’s remote monitoring features, we recommend the MiniMed 530G system.
Does Medtronic have recommendations for the 670G during outpatient surgery? Should the pump remain in auto mode or should auto mode be turned off? Generally, at our institution anesthesia providers give additional SQ rapid-acting insulin bolus via syringe to correct hyperglycemia>180 mg/dl while the pump continues at the basal rate.
Hi Tammy. We will have more information on the MiniMed 670G system in the spring closer to launch. In general, this decision should be made between the patient undergoing surgery and their healthcare team.
I would like to know if Medicare will pay for the 670 G
Leo, we are working with payers to establish coverage for the new system and should have more information in the coming weeks.
Has the new system been approved by Blue Cross/Blue Shield of Alabama?.
Thomas, now that we have FDA approval, we’ll be partnering with payers to drive broad access for this new technology. More information will be shared when the MiniMed 670G system is available this spring.
When will any of this be approved by MEDICARE
Rd, we’ll have more information closer to the launch in Spring.
Hi Sara,
I’m not a person who lives in the USA,
but in Italy,
They are in possession of Medtronic 640G
I read that there are some benefits to get 670g
And ‘possible for the country outside of the US?
Hi Antonino. We expect regulatory approval for the MiniMed 670G system outside of the US in summer 2017, but I cannot yet speak to specific countries.
Will this system be available for insulin dependent type 2 diabetic? Can this system be used on a type 2 diabetic?
Great question, Barbara. Currently, the MiniMed 670G system is only approved for people with type 1 diabetes ages 14 and older. However, we do have the MiniMed 630G system which is approved for people with type 2 diabetes. I encourage you to discuss your options with your healthcare team.
i just got put on a pump im on the 630g and i work in a magnetic field and it messes up the pump it makes me reset it and tells me the resivor is empty to you know any way to fix this i end up reseting it 40 to 50 times in a 12 hour shift while im at work
Hi Alvin. The nearby magnetic fields can render your devices nonfunctional or damage the part of the pump that regulates insulin delivery, possibly resulting in over-delivery which can cause severe hypoglycemia. If you are going to be exposed to any type magnetic fields, take OFF your pump, sensor, transmitter, meter and remote control before entering a room containing any of these pieces of equipment. If your pump is inadvertently exposed to a magnetic field, discontinue use and contact our 24-Hour HelpLine 1.800.646.4633 and select option 1 for further assistance.
also i have a few friends i work with that are diabetic also they use pumps they use the 715 model and it seems to work fine in the magnatizam its just mine that has issues and it only messes with the resavor nothing else
I recently received the 630G and have received training via our local Diabetes Education Center at our hospital (vast improvement over the 530 series training) along with the Enlite CGM. Thus far I have been on the 630 for about two weeks and am really impressed with the pump itself. However, the CGM has thus far given less than stellar performance with an average of 38% difference in readings versus the Bayer Contour Link and finger pricks. The reliability of keeping connected is vastly improved but through three CGM’s I am experiencing “Low Alerts” and “Suspended Deliveries” when my finger pricks are coming up at 100-110 but the SG shows up as 55-65. It is making me wonder if I made the right choice? Really like the technology but the reliability of readings seems at best marginal thus relying totally on the SG is becoming unreliable.
Hi Trey. I’m happy to hear your MiniMed 630G system training went well, but am sorry you’re having trouble with your CGM. I will have a member of my team connect with you to try and help you out.
HelloSara
I have my older brother who lives in the middle east lost his vision because of type 1 diabetes
my question is if I can order MiniMed 670g for him (I live in Canada if you have a agency here)
Hi Jason, I’m sorry to hear your brother has lost his vision due to diabetes complications. The MiniMed 670G system is currently only approved for use in the US. We are expecting regulatory approval outside the US in Summer 2017, but I cannot yet speak to specific countries. Please check with local contacts who would be happy to help you and your brother out: https://www.medtronicdiabetes.com/customer-support/international-contacts
I’ve had the 630g now for a week and love it! Much better than the old 530g. My sensor readings have all been really close to my bg readings. Can’t wait for the 670g. Any chance they might be adding Bluetooth or any other “treats” since it won’t be out till the spring?
I’m so happy to hear you’re loving the MiniMed 630G system, Chris! Please let us know if you have any questions along your journey. We’re always here to help. 🙂
While I cannot speak to future products, due to FDA, please know we hear you and have a smart, dedicated team working on what’s next.
Please clarify how accurate the sensor glucose reading is to the actual blood glucose reading?? I have the 530G and used the sensor for 6 months –only to find a 20-40 point difference between the sensor and the blood reading. Since I am still labelled a ‘brittle’Type 1 diabetic for the past 46 years–the wide variance was ;not acceptable for me. Plus I ended up checking my blood glucose MORE due to the alarms sounding off at all times of the day and night. I am for new technology but would like a system which improves my life without the added frustration.e
Ruth, I’m sorry to hear you had a frustrating experience with the Enlite sensor. We’ve been continuously improving our Enlite sensors over the last several months and some of the changes we’ve made have led to improved accuracy on day 1, better adhesive, and a more consistent experience for the full 6 days.
The Guardian Sensor 3 is our newest and most advanced glucose sensor with enhanced accuracy and performance, and a longer 7-day life. It’s the only sensor trusted to power a hybrid closed loop system.
I am a 32 year diabetic and a pump user of 24 years. For 4 months I have been on the Ketogenic diet (HFLC) and have been using CGM with Medtronic. Resulting in a near straight line on my sensor glucose. Going from hba1c of 9 to 6.2 in 3 months.
There are only 3 reasons I bolus insulin. #1 I bolus 1.2 units every morning at 6am to overcome Cortisol. #2 I bolus (prn) if I have a site malfunction (lack of insulin absorption. #3 I bolus if I unknowingly eat carbs (I then have to chase the high).
So, pretty much I live on 25 units of insulin a day via my basal delivery.
I hesitate to use words like “cure”, but, it would seem to me, that this technology, plus finger sticks that I am doing anyway, would make adjustments for exercise/activity level increases/decreases and would protect me during overnight high/lows. Which to me would be amazing.
Do I have this right?
Jill – Awesome job getting your A1C down to 6.2 in 3 months!
When used in Auto Mode, the MiniMed 670G system automatically adjusts your basal insulin to target 120 mg/dL based on your sensor glucose levels and past insulin needs. It also gives you two other SmartGuard HCL options – Suspend on low and Suspend before low. Suspend before low is a new Low Management feature that will temporarily stop insulin delivery if the sensor glucose value is approaching a preset low limit. It also automatically resumes insulin delivery when sensor glucose levels recover.
Hope that helps answer your question! 🙂
why does this pump have a limitation of 8 units per day when there are so many foods with high carb ratios that require fragile diabetics like me to dose highier to compensate for those carb ratios
Andrew, the system requires a minimum (not maximum) of 8 units of insulin per day to operate safely, so should not be used by patients who require less than 8 total units of insulin per day.
Hello, I am wondering if the closed loop will automatically compensate for blood sugars spikes that do not involve additional carb intake. It is not uncommon for my blood sugars to spike due to stress or hormonal changes, especially while I am asleep (but only some nights). Because carbohydrates are not part of these spikes, will my basal rate temporarily adjust to bring my blood sugar back down to a normal level while I am asleep, or will I be required to respond to an alert? Thank you!
Alisha, when used in Auto Mode, the MiniMed 670G system will automatically adjust your basal insulin dose to meet your insulin needs. This is based on your sensor glucose values and past insulin needs.
I’m a LONG time user of minimed pumps. For the last 21 years to be exact, I’ve used exclusively minimed products. I’m ready to upgrade in the next few weeks… But now,
I am now ACTIVELY looking at other products on the market. Why? Because frankly I’m frustrated that minimed doesn’t seem to be listening to their market. I’ve never cared that minimed was monochrome – it was good for battery life AND it worked.
But now, they are falling behind – lack of bluetooth support is an example. You guys are NOW making the Guardian connect for INJECTORS of insulin but NOT your pumpers? What the crap? In fact, I can get the new 670 and might as well throw away my current connect FOB because it won’t work – because you all changed the RF on the pump… but NOT to bluetooth?
I’m presently looking at options that will allow me to look at my apple watch, see my blood glucose graph and bolus from the watch! Also, the alarms cannot be heard or felt on the 751, so the haptic tap on the apple watch make sense.
Lastly, how in the world is DEXCOM beating you guys on accuracy of the CGM? And you only have to calibrate theirs every 12 hours? How did they beat the comapny who innovated it?
Finally, I know how you’ll respond… it’ll be “I’m sorry we can’t comment on upcoming products.” Which by the way is getting VERY tired to those of us wanting to make choices about the future… why? Because a google search very quickly shows you all CONSTANTLY talk about upcoming products. You talk about it at trade shows. Investor meetings, and frankly in other countries where you’ve released products BEFORE the U.S.!
Its worthless to ask – but I will anhow, “So, I want a closed loop system that is ACCURATE in CGM and viewable on my phone, AND controllable from said phone, is minimed providing that or should I sadly say goodbye with this pump upgrade?
(you do know there’s a whole community out there hacking for ourselves now because we are sick of waiting…. #werenotwaiting
Signed, a 21 year minimed customer.
Frank, I first want to thank you for being a loyal Medtronic customer for so many years, and I’m sorry you’re frustrated.
The MiniMed 670G system uses a different radio frequency that is more globally recognized. We have heard feedback like yours, and are working on connectivity for future products.
The Guardian Sensor 3, which is used with the MiniMed 670G system, is the first and only sensor approved by the FDA to power a hybrid closed loop system. The FDA approved this sensor because of its confidence in the CGM system. The sensor is our most advanced and accurate glucose sensor to date, offers seven-days of continuous wear, and pairs with the Guardian Link 3 transmitter that features an intelligent diagnostics chip that continuously monitors the health of the sensor to reveal when additional calibrations are needed or the sensor should be changed.
I understand it’s tiring hearing the same response when asking about future products. Please understand, as a medical device company, we have to follow FDA guidelines, and per those guidelines, we are not able to discuss future products on social media. The FDA regulatory approval process is a complex one with a lot of moving pieces. Countries outside the US have a different regulatory approval process for medical devices, which is why some products are approved in other countries prior to the US.
There is still more we can do as we continue our work toward even more advanced solutions, like a fully closed loop system, but the MiniMed 670G system is a big step in that direction and we’re excited to bring it to you and other people with type 1 diabetes.
Hello, I have got a question regarding your new insulin pump “670 G”. Do you know when this pump will be available in Germany? Kind regards Christine Hümmer
Christine, we expect regulatory approval outside the US in Summer 2017, but do not yet know which countries will receive approval.
I apologize in advance if this question was already addressed. I am using the 530g. How would this new 670 be different? By the way I love my 530…was an animas customer for 10 years and made my switch last year.
Hi, is there any timeline for approval in Australia? Is it possible to purchase and use in Aus prior to approval and what would be the drawbacks/negatives doing this
Hi Paul. As of now, I don’t have any updates on timing for the MiniMed 670G system being approved in Australia. I can tell you we expect regulatory approval outside of the US in summer 2017 (your winter 2017), but we do not yet know in which countries this will happen. We’ll keep the community updated as soon as we learn more.
Just received the medtronic 630G. I really wish I would of been informed of the new pump being made available in spring 2017. I would of waited for the new pump. Are new pump patients allowed to upgrade when the 670 comes available and if so will that be aloud at no charge to the patient.
Hi Michael. Based on FDA rules, we cannot talk about future products. We have heard feedback like yours and have passed this along to our product development team.Diana.
Customers who are on the MiniMed 630G system are automatically enrolled in the Priority Access program to be first in line to receive the MiniMed 670G system once available. You will be contacted closer to the launch date to see if you want to upgrade.
Is there any iPhone or Apple Watch integration planned for this pump?
Hi Alex. We’ve heard similar questions and feedback, and are currently looking into it.
I am a late onset Type 1 diabetic. 63 yrs old. Just now looking at insulin pump therapy. I don’t know what to do now. Do I go for a 630G or wait until 670G comes out. Insurance coverage is a real concern for me. I am definitely confused on all the jargon used about pumps. Could use some real help. I have had a serious hypoglycemic episode and like your insulin suspend feature. Currently using injection pens.
Hi Paula, I’m glad you reached out to us. I understand learning all of the new product features can be a bit confusing at first, but with the help of our StartRight team and your local clinical rep, you’ll be up to speed in no time! Please email me your contact information at betweenthelines@medtronic.com, and I will have someone from my team reach out to you to discuss your options.
Hello Medtronic USA.
When will this system be released in Europe say the Netherlands.
I am currently using the “old” VEO 554 series in combination with your continue sensor Enlite.
This works fine but my Insulin pump needs to be replaced by a new version because is reaches its end of its technical lifetime.
So when will the 670G be release in Europe and what must I do to get the 670G instead of the 640G who is current released version in the Netherlands
Hi Toon van Dongen, the MiniMed 670G system is currently only approved for use in the US. We expect regulatory approval outside the US in summer 2017, but I cannot yet speak to which countries.
Will the 670G have the ability to interface with an iPhone ?
Frank, the MiniMed 670G system is not compatible with our MiniMed Connect, as they are on two different radio frequencies. We have heard feedback like yours and are looking into this.
After spending 20 years in aerospace, changing a frequency is a very easy task … AND given that the data is already being sent to the Contour next test kit, and allowing this device to act as a remote control, most of the work is done !
So that leaves it to marketing and executives to simply decide. Sad if with this much advancement Medtronics will drop the ball and not make the 670G smartphone compatible.
Frank A
Hi Sara,
The iphone app is a must have. I cannot believe that Medtronic would launch the 670G without a similar app. Medtronic needs to do a better job of propagating its technology to the next level.
As Frank alluded to, most of the work is already done, and this shouldn’t be that much of a challenge but huge in the management of the disease. Please run this up the development flagpole and get us that iphone support we deserve from the beginning of the 670G launch!!
Best,
MarkG
Thanks for your feedback, Mark. We have heard this feedback and are looking into connectivity for future products.
I agree with both Frank and Mark. Medtronic is going to receive much bad press if a technology that was offered in a previous pump is not incorporated into it’s latest and greatest pump. Or could this be Medtronic holding things back like Apple does to get you to buy a new pump every year? Hmm…
In Auto Mode, are 120mg/dl and 150mg/dl the only options for target blood sugar? Or can you set the target to something higher, say, if you want to be even more conservative?
Hi Aaron. Yes, when used in Auto Mode, 120 mg/dL and 150 mg/dL are the only options for target blood sugar. The standard glucose setting in Auto Mode is 120 mg/dL, and the target can also be set temporarily to 150 mg/dL for exercise and other events. The 120 mg/dL target was chosen by a world-class team of clinical experts as an appropriate target, and those who participated in the clinical trial shared they had very positive experiences with the 120 mg/dL.
My son is 11 and is on MDI’s. Our endo is suggesting he go to a pump now and this is the one he is looking into. I know that the FDA has it approved for 14 and up. Will insurance cover it for my 11 year old.
Hi Meghan. Please email me your contact information at betweenthelines@medtronic.com, and I will have a team member reach out to you to discuss your son’s options.
Hi Sara,
My son is currently on the 630G and we are anxiously awaiting the arrival of the 670. One thing we miss however is the ability to monitor our son’s BS level though a cell phone app, this is a very valuable service that is available from a competitors CGM. Will this type of sharing technology be available on the 670G with the Guardian sensor?
Hi Gary. We have heard feedback like yours and are looking into this.
Glad to finally here Medtronic is “looking into this”. Seems like a no brainer to me. Not sure why it would not be in the new pumps.
When will the Minimed 670G be available in India ?
Hi Satindar. We expect regulatory approval Summer 2017, but I cannot yet speak specifically to India.
I have the 630g i just left my DR. office and was told to ask if i can get on the list for the 670g pump. thank you
Hi Martin. All customers on the MiniMed 630G system are automatically enrolled in the priority access program to receive the MiniMed 670G system once available.
Hi, I have 3 questions please:
1. My daughter has the 640g pump, which works with the Guardian sensor 2. Will the guardian sensor 3 be compatible for use with the 640g?
2. As a parent getting readings to my phone would give great peace of mind and could save her life. Is there a Medtronic solution on the cards (other than the medtronic connect as that would entail additional cost and a third attachment which simply will not fit on a small body).
3. Is there a good technical reason why the guardian sensor 3 does not have built in dual transmission (i.e. to the pump and to a cell phone) because if this can be done in two different sensors why not in the same sensor?
Hi Erik. Per the FDA, I am unable to discuss products that are not approved in the US. I recommend you speak with your daughter’s doctor for further guidance. We have heard feedback similar to yours, and are working on connectivity for our future products.
Will these be offered with a tubeless pump?
Hi Phil. The MiniMed 670G system is not tubeless.
Sara, since the FDA has already approved the 670g why is Medtronic reluctant to post exactly what the features are for the 670g? This would help people decide if they want to purchase the new pump or wait for the next version of the pump.
Sara, I have an older Paradigm I got through the VA and Private Insurance. How quickly can I get a 630G?
Also, available in “Spring 2017” is vague. Can you narrow down the availability date? Thanks.
Hi Bob. Please email me your contact information at betweenthelines@medtronic.com, and I will have someone contact you to discuss your upgrade options. I’m sorry I’m not yet able to discuss any specific dates for the MiniMed 670G system availability. We will keep the community updated as soon as we can.
Hi Sara
I am interested in Minimed 670G how ever i have initied now to get minimed 630G . I just wanted to know below 2 question
1) I got to know from Medtrocs team that if i enroll now for 630G then i will be part of priority access and 670g will be upgrade in zero cost. is this true ?
2)How safe is my insulin in the pump where ever temperature is more then 100 degree F. My job is travelling and most of the time i will be in visiting different customer.
Hi Ranjit. If you are on the MiniMed 630G system, you are automatically enrolled in the priority access program to be first in line for the MiniMed 670G system once it is available. The cost differs depending on various factors. Please send me your contact information at betweenthelines@medtronic.com, and I’ll have a member of my team reach out to help answer your questions.
Hi Sara,
Thank you for the reply, Can you please let me know my 2nd question.
Ranjit, avoid exposing your pump and remote control to temperatures above 108°F (42°C) or below 34°F (1°C), as this may damage your device.
So since I’m using the MiniMed Paradigm Revel Insulin Pump how can I get on the priority list?. Doesn’t make sense to purchase the 630G now, then upgrade in a month to the 730G.
I’m having trouble with the MiniMed Paradigm Revel Insulin Pump. The bottom of the plunger pushed out so I had to push it back in. Not sure if that’s safe. Would Medtronic be willing to upgrade mine to the 630 since my Revel is plunger faulty?
Hi Dale. Please email me your contact information at betweenthelines@medtronic.com, and I’ll have one of my teammates reach out to you to discuss your upgrade options.
Hello, I would like to know when the 670 does come out do your past customers who purchased the 630 get first opportunity for the 670 ? I did not purchase the sensor or transmitter with the 630 but will do so depending on if these work with the 670 also.
Hi William. Customers who are on the MiniMed 630G system are automatically enrolled in our Priority Access program to be first in line to receive the MiniMed 670G system when available. The MiniMed 670G system uses a different sensor and transmitter than the MiniMed 630G system. The MiniMed 670G system uses the Guardian Sensor 3 and Guardian Link 3 transmitter, and the MiniMed 630G system uses the Enlite sensor and Guardian Link transmitter.
When will the 670G be available in South Africa?
Daniel, we expect regulatory approval outside the US in summer 2017, but I cannot yet speak to specific countries.
Our daughter is currently on the vibe/dexcom system and we are very interested in getting the Medtronic closed loop systems. How do I inquire about coverage and what our cost would be?
Hi Chanda. Please send me your contact information at betweenthelines@medtronic.com, and I’ll have a member of my team reach out to you.
My dream looks like it’s going to come true! I am on Medicare and it looks like when I see my doctor on Monday I will be on the patient trial list! Sara I wish you were my wife! I hope we can talk soon
Hello Sara,
I understand that Medtronic is reluctant to provide pricing info for the 670G and Guardian 3 CGM’s since they are not released yet, but can you comment on pricing differences (in percentage) between the Enlite sensors used on the 630G and the Guardian 3 sensors used on the 670G?
Thanks
Chris, we expect the MiniMed 670G system to be commercially available at currently offered Medtronic pump system pricing.
Hello,
Will it be possible to use 640g with guardian3/enlite3 instead of guardian2/enlite2? Would appreciate direct connection between transmitter and mobile (as in guardian3) instead of transmitter > pump > keyfob > mobile….
Hi Lech. Since we’re the US team, due to FDA rules, I’m not able to discuss future products or products not approved in the US.
Hi Sara, I was wondering will Medtronics eventually make a bigger reservoir for the pump as of right now i have to change every 2 days.
Hi Shannon, I am not allowed to talk about future products, due to FDA rules, but will be sure to pass along your feedback to our product development team.
Does it work with type two diabetes and do you have Dr. connections in the United States that are starting to use your system ?
Jim, the MiniMed 670G system is currently only approved for people with type 1 diabetes. Our MiniMed 630G system and MiniMed 530G system are approved for people with type 1 and type 2 diabetes.
As there is a warning that this pump shouldn’t be used by pregnant women and people with impaired kidney function , Can a person who had kidney transplant around 4 years back use minimed 630g now and then switch to 670g once available
Hi Parul, since I don’t know the specifics of your health, I recommend talking with your healthcare team about the best option that works for you.
I didn’t get an email fornthe updrage to the 670g. I am not even sure medteonic has my email address. What should I do?
Hi Danielle. If you’re on the MiniMed 630G system, you’re automatically enrolled in the Priority Access Program. Someone from Medtronic will be texting and emailing you in the coming weeks to provide you with more information.
Will the new 670g use the same infusion sets and reservoirs that the current 530g pump uses? Will the current Silhouettes work with the new pump? Will the 670g be able to accommodate the smaller 1.8ml reservoirs or will it only be for the 3.0ml reservoirs?
Hi Sandy, you can use the same infusion sets with the MiniMed 670G system and only the 3.0 ml resevoir.
Sara, thank you for all your thorough answers. I read this entire forum tonight. I have contacted a minimed specialist and am excited to get a pump for my 17 year old daughter who has been type 1 diagnosised for three years now. This has been an awful experience, but am happy to be getting my baby a pump. Keep up the good work on the technological advances.
What are the glucose limits that can be input into the pump? I’ve read the low limit is 120? Hopefully this isn’t true.
Hi Jen. When used in Auto Mode, the MiniMed 670G system automatically adjusts your basal insulin delivery based on your sensor glucose values and recent delivery needs, using a target of 120 mg/dL. Does this answer your question, or were you asking about something else?
Ok so in Auto Mode the target is 120…can it be lowered? And if it cannot be lowered, in manual mode can you set the target lower? Say to 100 instead of 120?
will my Dr. be able a prescription for my 670 G for insurance coverage?
Lisabeth, your doctor would need to write you a prescription for the MiniMed 670G system. Insurance coverage will vary depending on your plan. Please email me your contact information if you’d like to connect with a member of my team to discuss your coverage options, betweenthelines@medtronic.com.
Sara,
The commercial release of the 670G is in spring of 2017. Can you provide any further details when these will begin shipping?
Thanks,
Jason Poole
Jason, we will start the full commercial launch for the remaining individuals in the Priority Access program in June.
Hi, Sara.
My very best friend has been on pens for insulin for a while & has often wondered about using pump & the convenience, still realizing finger pokes & close monitoring is definitely necessary. It seems as though this method would offer so much peace of mind and their Endo just discussed the pump option with them recently.
However, it would really be great to reduce the stress and constant worrying each day what their blood sugar # is if there was an app for phone or software for computer, that can either be used with new 670G or 630G pump. This would make everyone sleep & feel better, knowing when our friend is working hard outside or working out & exercising, we can check on the #s to ensure our friend’s #s are in safe range.
Are there any plans in 2017 to have app or software work with newer model 670G or 630G. This would be their first pump & even though 530 older model offers this, it would be great having a newer model pump with the security of being able to see blood sugar #s on phone app or computer.
LB, You sound like a great, caring friend! We are working hard on developing new technologies to provide people with more convenient options to access their or their loved ones health information anytime, anywhere. We’ll keep you updated when new products become available!
I have a Minimed Paradigm currently. How do I get this new fancy artificial pancreas? Thanks!
Hi Amy, you can sign up through our Priority Access program: https://www.medtronicdiabetes.com/products/priority-access
If I purchased the 630g in Sept 2016, when will I get the 670g?
If you opted into the Priority Access program when you purchased the MiniMed 630G system, you will be contacted via email or text when it’s time to place your MiniMed 670G system order.
My husband has been on a metronics pump for years now – but more important to me is that when he is not at home I can read his levels on my phone. Without that I go back to stressing 100% of the time. Pump sounds great but if metronics already has that capability why would you not make it compatible with the new pump from that the start? It’s like going backwards. This is the only reason he wont switch
Michele, the MiniMed 670G system was approved faster than anticipated. The Bluetooth program timeline couldn’t be accelerated fast enough and we didn’t want to hold back releasing the system for a single feature. This is an important feature we are working to develop, but we unfortunately are not able to share timelines.
Will the new 670g have the same capability as the 550 with the mini med connect? With the work I do, i can not always pull out my pump to see why it is going off, would be nice if it could link to a smart watch.
Christopher, the MiniMed 670G system is not compatible with MiniMed Connect, as they reside on different radio frequencies. We are looking into connectivity options for future systems. For customers currently interested in the remote connectivity feature, we recommend the MiniMed 530G system.
A few years back I was able to attend a class put on by Medtronic’s that took an in depth look at pump therapy.
This class was very informative and extremely beneficial to me and my wife. Will Medtronic’s be putting on these types of classes in the future to help users to fully use the new 670G? Educators are great but after using the pump for a while, users need a different perspective and I find the intense study of these classes to be invaluable.
Hi Roger. I’m glad you found the class helpful. Do you remember how you found out about the class and signed up? I recommend reaching out to your local rep about any upcoming classes she/he may have planned or knows about.
I have been a Type One diabetic 48 years; using MiniMed 630g since November 2016. My HbA1c is below Cleveland Clinic 5.6% standard upper limit. I would like to switch to 670g if Medicare starts covering Guardian 3 sensors. If I switch to 670g using auto 120mg/dL, I will be unlikely to keep my HbA1c below Cleveland Clinic 5.6% standard upper limit (my current target is 95mg/dL). If I set 670g auto off, will I be able to use the 670g as I have my 630g?
Hi Robert. The 120 mg/dL target is proven to be a safe target for closed loop therapy. The MiniMed 670G system clinical results showed safety in several areas including A1C reduction, time in range, and lack of severe hypoglycemia or DKA. These results were gathered across a range of A1C groups (5.2% – 9.8%). You can choose to keep the Auto Mode off on the MiniMed 670G system.
If the 670g is set to maintain blood glucose at 120mg/dL; that is equivalent to HbA1c of 5.8%. Since mean average of my last 3 HbA1c’s was 5.3%, the 670g will raise my HbA1c from current level of 5.3% to 5.8%. I currently use more than 150 units of insulin per day due to insulin resistance; so maintaining careful control of my blood glucose is critical. I currently have a mean average of only 1 hypoglycemic episode between 45-50mg/dL per week.
I should repeat that HbA1c upper standard range at Cleveland Clinic is 5.6%. 5.8% maintained by 670g would be above their standard HbA1c range. My hospitals are Mayo Clinic and Cleveland Clinic who are ranked number one and three respectively in Diabetes & Endocrinology by US News.
My relative has very brittle diabetes, using insulin long acting 8 units or so per day.
Does this mean that this new medtronic MiniMed 670G launched this year in Canada ,not be suitable for him.
Please explain the rationale for this, as I gather using low dose insulin per day is not supported by this new medtronic system.
Hi Jit, the MiniMed 670G system is approved for people with type 1 diabetes using more than 8 units of insulin per day for safety purposes. The system is currently only approved for use in the US. We expect regulatory approval outside the US in summer 2017, but I cannot yet speak to which countries.
Dear Sara,
I am here in the USA (in California). I saw where they would start shipping the Mini Med 670G in Spring 2017…..which is now. When will I be able to get it? Thanks.
Also: I saw a news report wjere they called the 670G an “artificial pancreas”. Is that accurate? Thanks again.
Hi Earl. You will receive a text and an email when it’s time to order your MiniMed 670G system. We’re looking at June. The MiniMed 670G system is a hybrid closed loop system, as you still have to interact with the system to enter carbs and calibrate the sensor periodically.
Hi, my name is Kevin. I am type 1 dietetic. I have the 630g insulin pump. I am pretty sure that I qualify for the 670 coming out. I am not sure what I am suppose to be for sure. But I definitely want the new 670 insulin pump when it comes out.
Thanks
Hi Kevin. I checked with our internal teams, and you are opted-in to the Priority Access program. You will receive a text and email once your MiniMed 670G system is ready to order.
Hi, I live in Toronto, Ontario, Canada and I am confused about the launch of the 630G in Canada and 670G in the US. Medtronic exists in both Canada and the US yet we are a generation behind when it comes to pump approval. The 603G is just now available in Canada while the US is launching the 670G pump. Why are we receiving outdated technology?
Hi Brenda. I understand this can be frustrating. Each country has their own regulatory guidelines for approving products. We expect regulatory approval for the MiniMed 670G system outside of the US in summer 2017, but I cannot yet speak to which countries.
I use a 630G pump currently (since Jan 2017). I have noticed that my CGM readings can differ significantly, sometimes more than 50 points, from my BG reading. This can be critical, especially when I am dropping quickly. Will the new sensor with the 670G pump respond more quickly and be closer to a concurrent blood glucose (finger stick) reading?
Also, will I be using the same BG meter (the Bayer Contour Next) with the 670G and will the 670G still be compatible with the upload software so I can still store my readings online and share them with my medical team?
My son does not use a total of 8 units of insulin or more per day. Will he not be able to use the Medtronics 670?
Thank you!
Shelby, the MiniMed 670G system is intended for people with type 1 diabetes, ages 14 and older, who use a minimum of 8 units of insulin per day.
My son is on the 670G – and all to often the unit gets into a loop telling him to test his BG.. over and over and over again. This is not just calibration – it is an obvious flaw in the design of the internal logic. (Note: I have 50 years experience in software design and test… I know a bug when I see one!) This has been reported by him – and he was told to ignore it until it resets. Waiting can take hours. He has wasted a fortune in test strips trying to satisfy the unit’s request to test his BG. He can’t ignore it… and is ready to return to his old pump. Are there any plans to upgrade the software/firmware/internal logic of these units to eliminate this annoying aspect of the unit. Thank You.
Charlie,
I’m so sorry to hear that. Please send me your son’s contact information so that I can put him in touch with someone who can help. You can send his contact information to me privately at gisela.pedroza@medtronic.com. Thank you!
We have been Medtronic customers for over 12 years and my son is on his 3rd Medtronic pump. When Medtronic introduced the priority access plan with 0 copay for the 630 and then 670, I was excited because finally I could start pumping and could afford it with 0 copay (let’s face it, Nothing is free, Medtronic still gets paid very healthily by the insurers so they can afford this promo). Here it is two months later, I was told they would expedite so that the pump would be shipped prior to the arbitrary April 28th cut off date then I was advised that there was a problem with the third party shipper and I would have to pay $499 for the 670 when it was released but when I brought up that I submitted everything prior to the promo deadline, they indicated that they would honor the 0 copay promo. Finally, I got a call last week from Medtronic and she indicated that my insurance wouldn’t cover the 670 but that I was “approved” for the 630 at “only” $88 a month for 13 months copay. What happened to the 670 at 0 copay? At any rate, I called my insurance (Tricare) and talked to 3 different people and they all indicated that I was approved for a pump and they don’t differentiate between what pump I choose, that’s my choice and regardless, it’s covered. I went back to Medtronic with this info in a voicemail to my rep and over a week later have heard nothing. I’ve never gotten runaround and lies like this from Medtronic in our 12 years of working with them so all I want is truth and The straight scoop. I wanted to have my new pump in time for Friends for Life and be able to discuss it in the conference however now, All I can speak to is how I was lied to and got the unbelievable runaround…Bottom line is: Whether Medtronic underestimated customer response to their priority access promo or overestimated availability and release of the 670g, they need to eat the costs for their errors, honor their commitment and not lie to customers. The arbitrary 28 Apr ship date from Medtronic, otherwise the customer was no longer eligible for the promo?? Shipping by which Medtronic has control of?? That gave them a LOT of one sided flexibility on how they wanted to honor their own promotion. For customers like me who submitted all the required info and got all the required approval prior to the 28 Apr deadline and because Medtronic themselves were unable to execute shipment by 28 Apr, I’m no longer eligible for the promo without exception??? Really?? The delay in shipment was NOT my problem, it was Medtronic’s and their third party provider so therefore, customer service should be priority and respect for the customer should become first. No respectable company would EVER penalize a customer and make them ineligible for a promotion THEY initiated when it’s the fault of their own internal issues and delay in shipping a product however Medtronic has done that to me and I’m sure many other customers. There are too many options with competitors out there and while I’ve been a champion of Medtronic for 12 years, the debacle in the way they’ve attempted to release the 670 and the way they’ve been treating customers has been disgusting and beyond unacceptable. They need to make this right for all customers and if they don’t I’m going to every consumer advocate agency and share my experience…Customers are not idiots!!! We may be insulin deficient, NOT intellect deficient!!!!
Hi Jeff. I do apologize this has been your experience. Please note that we’ve asked for you to share your contact information via our Facebook page. Once we receive that, we will be in touch to see if there is anything we can do.
Any status with regards to Medicare coverage for the 670g?? My insurance follows Medicare guidelines for DME & I am worried I will not have access to this life changing device.
Hi Debbie. After reviewing the Centers for Medicare and Medicaid Services (CMS) decision on CGM coverage as well as how it applies to the MiniMed 670G system, Medtronic will be pursuing new, non-adjunctive labeling for the Guardian Sensor 3 that is consistent with that determination. We believe this will enable reimbursement for Medicare patients who use Medtronic CGM. However, at this time we do not have a timeline to share of when this might happen.
My husband has a Medtronics pump 630g and is on a Medicare advantage plan they will not approve your CGM. We have tried appeals all the way to an administrative law judge . They will only cover the dexcom G5. They said it is the only FDA approved CGM? If you can help in way let me know. Thanks
Hi Paul. Please send me an e-mail with your contact information and I’ll have someone reach out to discuss your options.
I have read over and over about the insulin dosing problems that adolescents have due to all of the hormonal changes that they go through; and I understand that this is important, as so many T1 diabetics are diagnosed as children. However, I was diagnosed over 30 years ago, at the age of 21, and my current problem is the unpredictable hormone swings of perimenopause. If anyone has mentioned this in the literature for this product, I have not seen it. How well does the 670g handle the sometimes sudden swings in insulin resistance (sometimes up and sometimes down) caused by these hormonal changes. If what my older sister has gone through is anything to go by, these swings will only get worse for the next 5-10 years. I am not asking for any medical advice, I am just asking how well this pump handles these kinds of changes.
Hi Yvette. As the pivotal trial for the MiniMed 670G system only lasted for 3 months, we do not yet have data on this specifically. As more patients go on the system, we look forward to sharing learnings from patients and HCPs. In the mean time, we highly suggest speaking to your HCP regarding this concern.
My daughter is 7 years old and I planing to buy one for my daughter is ok. My daughter is 7 above can we use it….
Hi Zaeem. The MiniMed 670G system is approved for people with type 1 diabetes ages 14 and up. I suggest you reach out to your healthcare team to go over your best options.
Dear team.. do we have any parents here that there are kids using insulin pump in age of 7 below??? Actually my daughter is 7 years old right now and I m planing to buy en pump for my daughter but my question is do she really need to do anything when she’s having interval at the school?? I mean the insulin release it self to the body or she need to adjust the amount of insulin…
Why is this only approved for type 1 Diabetics? I have been using an insulin pump for many years and was diagnosed as type 1 and type 2 through the years. The one time my endocronologist wrote an Rx for enlite sensors and changed my diagnosis to Type 2, the Rx was denied because the FDA has not approved it for Type 2 diabetics. What gives? Can you explain the logic here? Not having the sensor with the pump is like driving a car with 3 wheels.
Hi Allen. Medtronic conducted a pivotal trial of the MiniMed 670G system with 124 patients and over 12,000 study days of pump data. All of the individuals involved in the trial had Type 1 diabetes which is why the FDA has only approved the MiniMed 670G system for people with Type 1 diabetes.
My wife has just received the new 670. When will the sensor become available as the auto mode is just a dream now?
Hi Mark. I’m happy to hear that your wife received her MiniMed 670G system. For information about sensor orders, she can email dhelp@medtronic.com and provide them her name and contact information; someone from the Customer Service Center will then reach out to her to provide her more information.
Guten Morgen, so viele glückliche Menschen. Am liebsten würde ich sofort nach Amerika ziehen damit ich auch in den Genuss von der 670g komme. Wohne leider in Österreich und niemand weiß wie lange es dauert bis Diese pumpe zu uns kommt.
Meine Versicherung würde mir schon eine neue Zahlen aber ich will nicht denn diese wäre veraltet. gibt es irgendeine Möglichkeit oder was könnte ich tun damit ich so schnell wie möglich in den Genuss der 670g komme?
Edith, unfortunately we do not have a timeline for when the MiniMed 670G will be available in Austria. For legal reasons, we can only sell products in the countries where they are approved. If you would like to explore the Medtronic therapy options available to you, please contact the 24h-Service-Hotline in Austria at 0820 820 190.
Danke liebe Gisela, ich habe hier in Österreich alle Optionen schon wahrgenommen. Leider komme ich hier nicht weiter. Außer beten bleibt mir nichts anderes mehr übrig. Ich hoffe sehr dass die Pumpe sich auch in Österreich durchsetzen wird. Habe nicht einmal damit gerechnet dass ich hier eine Antwort bekomme . Habe mich sehr gefreut .Recht herzlichen lieben Dank Edith
Please consider the fact that the pump can also be used by type 2 diabetics.
If you conduct a study only among type 1 diabetics, the FDA will only approve this for that group of people and exclude every other diabetic. Insurance companies pick up on this and will not approve claims submitted for certain items ordered by Type 2 diabetics.
This is very short sited thinking and leaves many of us wondering why you would eliminate Type 2 Diabetics from your study.
Hi Allen. We continue to collaborate with the world’s experts to build clinical evidence that supports sensor augmented pumps as an important tool for diabetes therapy.
Very helpful blogging. Already I’ve visited several links you provided in your list. All the links are very effective. I’d like to see more such beautiful links from you by this posting.
How much is the system of you pay cash? My insurance will not cover it at all.
Hi Cynthia. If you need pricing information and/or if you need assistance with your out-of-pocket cost, Medtronic offers flexible payment options and a financial assistance program for qualifying customers. To learn pricing and whether or not you qualify, please contact the Customer Support team at 800.646.4633, ext. 21137.
Excellent and helpful post.I am so glad to left comment on this. This has been a so interesting ..I appreciate your effort..