MiniMed 670G System Support

MiniMed 670G System Support

MiniMed 670G System Support   >   Status Icons

Status Icons


Device: MiniMed® 670G (1780)

Status icons

The status icons appear at the top of the Home screen to provide a way for you to quickly check the status of your system. The status icons are described in the following table.

Icon Icon name What it means
Battery The color and fill level of the battery icon indicate the charge level of your pump battery. When a new battery is inserted and your battery is full, the icon is solid green indicating that approximately 100% of your battery capacity remains. In most cases, you can expect at least 7 days of use remaining. As the battery life is used, the icon changes from solid green to black with a red outline, indicating that the charge level of your battery is decreasing from 100% to 0%. When your battery is low, the icon has a single red bar indicating that under typical use you have up to 10 hours of use remaining. When your battery needs to be replaced immediately, the icon is solid black with a red outline, indicating you have less than 30 minutes of use remaining.

Reservoir

Shows the approximate amount of insulin left in your reservoir. The color and the fill level of the icon indicate the status. When your reservoir is full, the icon is solid green. As your insulin is used, the icon becomes emptier and the color of the icon changes.

approximately 85-100% remaining

approximately 71/84% remaining

approximately 57-70% remaining

approximately 43-56% remaining

approximately 29-42% remaining

approximately 15-28% remaining

approximately 1-14% remaining

the amount remaining is unknown

Audio Shows the audio mode you are using: vibrate only, audio only or vibrate and audio.

When the Alert Silence feature is turned on, the audio mode icons appear with an additional notation of a music note with a line through it:

Block Mode Appears when the pump is in Block Mode, and that certain functions are restricted. Block Mode to restricts access to critical pump settings.
Airplane Mode The Airplane Mode icon appears in place of the Connection icon if Airplane Mode is turned on. When Airplane Mode is turned on, the pump cannot receive wireless communication from other devices.
Temporary Network Connection Appears while you are temporarily connected to a remote upload device.