Setting & Features

Setting & Features
print font aaa
x

Adjusting Your Settings

Device: mySentry

Setting the Alarm Silence

Note: The Sensor Alert Silence feature on the pump is separate from the mySentry system Alarm Silence feature.

This setting allows you to silence your monitor alarms and alerts, but the monitored pump will continue to alarm according to its current settings.

  1. Make sure there are no alarms or alerts currently displayed on the monitor.
  2. Press to turn the alarm silence feature ON.
  3. Press a second time when you are ready to turn the alarm silence feature OFF.

Important: If the Alarm Silence feature has been selected, it will remain selected even when you disconnect or reconnect the monitor to a power source.

Adjusting the Alarm Volume

This setting allows you to adjust the alarm volume.

  1. Press until the Main Menu displays.
  2. From the Main Menu, go to the Adjust Alarm Volume screen
    • Main Menu > Go to Utilities Menu > Adjust Alarm Volume
  3. Follow the onscreen instructions to adjust the volume to your desired level.

Note: If the Alarm Silence option is on, then the alarm is silent.

Adjusting the Display Light

You can also adjust the display light brightness to match your preference.

  1. Press until the Main Menu displays.
  2. From the Main Menu, go to the Adjust Screen Brightness screen
    • Main Menu > Go to Utilities Menu> Adjust Screen Brightness
  3. Follow the onscreen instructions to adjust the brightness to your desired level.
Adjusting the Nightlight Brightness

There is a nightlight on the back of the monitor to help you find it in the dark. You can adjust its brightness to match your preference and to turn it off if you don’t need it.

  1. Press until the Main Menu displays.
  2. From the Main Menu, go to the Adjust Nightlight screen
    • Main Menu > Go to Utilities Menu > Adjust Nightlight Brightness
  3. Follow the onscreen instructions to adjust the brightness to your desired level.

Note: To switch off the nightlight, press .

Turning On the Privacy Screen

The Privacy screen allows you to see an overview of the system data without displaying any specific glucose details.

To activate this screen, press from the Glucose Graphs screen.

Adjusting User Information

The Enter User Info screen enables you to adjust the initials of the person wearing the pump and the pump user image. To adjust this information, perform the following procedure:

  1. Press until the Main Menu displays.
  2. From the Main Menu, go to the Enter User Info screen
    • Main Menu > Go to Utilities Menu > Edit User Info
  3. Scroll to locate each user initial, pressing to confirm your selection. After you select the second initial, the user image displays.
  4. Scroll to choose your desired image, then press . A confirmation screen displays.

9404492-011 20111110